Technicial Specifications
| Gross Power | 45.5 kW |
| Gross Power - SAE J1995 | 45.5 kW |
| Displacement | 2.2 l |
| Stroke | 100 mm |
| Bore | 84 mm |
| Engine Model | Cat® C2.2 T |
| Net Power - SAE 1349/ISO 9249 | 42 kW |
| Rated Operating Capacity | 680 kg |
| Rated Operating Capacity with Optional Counterweight | 726 kg |
| Tipping Load | 1360 kg |
| Breakout Force - Tilt Cylinder | 1852 kg |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1 speed, OROPS, dirt bucket, tires, no optional counterweights and manual quick coupler (unless otherwise noted). |
| Operating Weight | 2641 kg |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1 speed, OROPS, dirt bucket, tires, no optional counterweights and manual quick coupler (unless otherwise noted). |
| Wheel Base | 986 mm |
| Length - With Bucket on Ground | 3233 mm |
| Length - Without Bucket | 2519 mm |
| Height - Top of Cab | 1950 mm |
| Vehicle Width over Tires | 1525 mm |
| Maximum Overall Height | 3709 mm |
| Bucket Pin Height - Maximum Lift | 2854 mm |
| Bucket Pin Height - Carry Position | 200 mm |
| Reach - Maximum Lift/Dump | 505 mm |
| Clearance at Maximum Lift and Dump | 2169 mm |
| Ground Clearance | 195 mm |
| Departure Angle | 26° |
| Maximum Dump Angle | 40° |
| Turn Radius from Center - Coupler | 1195 mm |
| Turn Radius from Center - Bucket | 1944 mm |
| Rack Back Angle - Maximum Height | 81° |
| Bumper Overhang - Behind Rear Axle | 967 mm |
| Maximum Reach with Arms Parallel to Ground | 1291 mm |
| Note | Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, 1 speed, OROPS, dirt bucket, tires, no optional counterweights and manual quick coupler (unless otherwise noted). |
| Turn Radius from Center - Machine Rear | 1502 mm |
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level I |
| Chain Box - Each Side | 6 l |
| Cooling System | 10 l |
| Engine Crankcase | 10 l |
| Fuel Tank | 58 l |
| Hydraulic System | 55 l |
| Hydraulic Tank | 35 l |
| Hydraulic Flow - High Flow - Hydraulic Power (Calculated) | 37.7 kW |
| Hydraulic Flow - High Flow - Loader Hydraulic Flow | 104 l/min |
| Hydraulic Flow - High Flow - Loader Hydraulic Pressure | 23000 kPa |
| Hydraulic Flow - Standard - Loader Hydraulic Flow | 61 l/min |
| Hydraulic Flow - Standard - Loader Hydraulic Pressure | 23000 kPa |
| Hydraulic Flow - Standard - Hydraulic Power (Calculated) | 23.2 kW |
| Travel Speed - Forward or Reverse | 12.7 km/h |
Advantages and Features
High Performance Hydraulic System
Maximum power and reliability are built into the machine's hydraulic system. In addition to providing power to the wheels, this system also provides the loader lift and tilt functions, powers the auxiliary circuit to drive work tools and drives the engine cooling fan. The hydraulic pumps are driven directly off the engine for maximum hydraulic performance and reliability - no belts are used. The hydraulic system also features:- Standard auxiliary hydraulics to power work tools that are available through quick connect hydraulic couplings rigidly mounted to the loader arm.
- Cat ToughGuardâ„¢ hoses for increased reliability and durability.
All Day Comfort
Comfort and ease of operation have been designed into every aspect of the operator station. The wide, spacious interior and uncluttered floor provide a comfortable work environment with excellent head, shoulder and leg room to keep productivity high and fatigue low. The adjustable seat and low effort controls keep the operator comfortable throughout the work day.
The Right Tool for the Job
Get the most out of your machine with the comprehensive line of Cat Work Tools. Designed and built for optimum performance and durability, these tools deliver high productivity in a variety of applications to maximize the versatility and flexibility of the Cat Skid Steer Loader:- Augers
- Backhoes
- Blades (angle, dozer)
- Buckets (general purpose, high capacity, dirt, utility, light material, multi purpose, industrial grapple, utility grapple)
- Brooms (angle, pickup, utility)
- Brushcutters
- Cold Planers
- Forks (pallet, industrial grapple, utility grapple, utility)
- Hydraulic Hammers
- Landscape Tillers
- Landscape Rakes
- Material Handling Arm
- Power Box Rakes
- Shear
- Snow Blowers
- Stump Grinders
- Trenchers
- Vibratory Compactors
- Wheel Saws
Standard Equipment
-
ELECTRICAL
- 12 volt Electrical System
- 85 ampere Alternator
- Automatic Glow Plug Activation
- Ignition Key Start/Stop Switch
- Lights: Gauge backlighting, two rear tail lights, two adjustable front and rear halogen lights, dome light.
-
OPERATOR ENVIRONMENT
- Gauges: Fuel level, hour meter
- Operator Warning System Indicators: Air filter restriction, alternator output, armrest raised/operator out of seat, engine coolant temperature, engine oil pressure, glow plug activation, hydraulic filter restriction, hydraulic oil temperature, parking brake engaged
- Vinyl seat
- Pull Down Ergonomic Contoured Armrest
- Control Interlock System, when operator leaves seat or armrest raised: Hydraulic system disables, hydrostatic transmission disables, parking brake engages
- ROPS Cab, Open, Tilt Up
- FOPS, Level I
- Top and Rear Windows
- Floor Mat
- Interior Rear View Mirror
- 12 volt Electric Socket
- Horn
- Backup Alarm
- Hand and Foot Throttle
-
POWER TRAIN
- Cat C2.2 T Diesel Engine
- Engine is Tier 4 Interim/Stage IIIA/Bharat Stage III Equivalent
- Engine meets Brazil Mar-1 emission standards equivalent to Tier 4 Interim and Stage IIIA
- Air Cleaner, Dual Element, Radial Seal
- S·O·SSM Sampling Valve, Hydraulic Oil
- Filters, Spin-on, Hydraulic
- Filters, Bayonet-type, Fuel and Water Separator
- Tilt Up Radiator/Hydraulic Oil Cooler
- Spring Applied, Hydraulically Released Parking Brakes
- Hydrostatic Transmission
- Four Wheel Chain Drive
-
OTHER
- Engine Enclosure, Lockable
- Extended Life Antifreeze, –36° C (–33° F)
- Machine Tie Down Points (4)
- Support, Lift Arm
- Hydraulic Oil Level Sight Gauge
- Radiator Coolant Level Sight Gauge
- Radiator, Expansion Bottle
- Cat ToughGuard™ Hose
- Auxiliary, Hydraulics, Continuous Flow
- Heavy Duty, Flat Faced Quick Disconnects
- Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
- Electrical Outlet, Beacon
- Belly Pan Cleanout
-
MANDATORY EQUIPMENT
- Quick Coupler, Mechanical or Hydraulic
- Seat Belt, 50 mm (2 in) or 75 mm (3 in)
- Cooling Fan, Demand or Standard
-
Comfort Packages (must select one of the following):
– Open ROPS (C0): Static Seat
– Open ROPS (C1): Suspension Seat, Deluxe Headliner
– Enclosed ROPS (C2): Features of C1 Package plus Heater, Cab Door, Side Windows, Cup Holder, Cab Debris Barrier
– Enclosed ROPS (C3): Features of C2 Package plus Air Conditioner
-
Control Packages (must select one of the following):
– Control Package 1: On/Off Auxiliary Hydraulics Basic
– Control Package 2: Proportional Auxiliary Hydraulics Deluxe
– Control Package 3: Proportional Auxiliary Hydraulics Deluxe, Work Tool Harness
– Control Package 4: High Flow Hydraulics
Optional Equipment
-
OPTIONAL EQUIPMENT
- Variable Speed Demand Fan (not available in all regions)
- Counterweight
- Beacon, Rotating
- Engine Block Heater, 120V or 240V
- Heavy Duty Battery, 880 CCA
- Oil, Hydraulic, Cold Operation
- Door, Glass or Polycarbonate
- Self-Leveling
- Paint, Custom
Related products
Augers
Dig postholes, footings, shrub and tree plantings easily and efficiently.
Blades
Cat® Blades efficiently doze, plow and move material. Specialized designs mean the perfect match for every job.
| Model | |||
|---|---|---|---|
| 1829 mm (72 in) | 72 in - 1829 mm | 66.3 in - 1685 mm | 30 degrees |
| 2134 mm (84 in) | 84 in - 2134 mm | 76.7 in - 1949 mm | 30 degrees |
| 2007 mm (79 in) | 79 in - 2007 mm | 68.9 in - 1750 mm | 30 degrees |
| 2337 mm (92 in) | 92 in - 2337 mm | 80.7 in - 2049 mm | 30 degrees |
Brooms
Cat® Hydraulic Brooms are available in a variety of configurations to match any ground-clearing job.
| Model | |||
|---|---|---|---|
| BA118C Manual | 104 in - 2637 mm | 83 in - 2119 mm | 32 in - 815 mm |
| BP115C | 78.3 in - 1990 mm | 60 in - 1524 mm | 26 in - 660 mm |
| BA118C Hydraulic | 104 in - 2637 mm | 83 in - 2119 mm | 32 in - 815 mm |
Buckets - Skid Steer Loader
Cat® provides a comprehensive line of machine-matched buckets for Cat Skid Steer Loaders and Compact Track Loaders.
| Model | |||
|---|---|---|---|
| 1576 mm (62 in), Bolt-On Teeth | 62 in - 1576 mm | 0.47 yd³ - 0.36 m³ | 407.9 lb - 185 kg |
| 1576 mm (62 in), Bolt-On Cutting Edge | 62 in - 1576 mm | 0.47 yd³ - 0.36 m³ | 440.9 lb - 200 kg |
| 1730 mm (68 in), Bolt-On Cutting Edge | 68.1 in - 1730 mm | 0.52 yd³ - 0.4 m³ | 551.2 lb - 250 kg |
| 1730 mm (68 in), Bolt-On Teeth | 68.1 in - 1730 mm | 0.52 yd³ - 0.4 m³ | 509.3 lb - 231 kg |
| 1883 mm (74 in), Bolt-On Cutting Edge | 74.1 in - 1883 mm | 0.58 yd³ - 0.44 m³ | 597.5 lb - 271 kg |
| 1883 mm (74 in), Bolt-On Teeth | 74.1 in - 1883 mm | 0.58 yd³ - 0.44 m³ | 549 lb - 249 kg |
| 2036 mm (80 in), Bolt-On Cutting Edge | 80.2 in - 2036 mm | 0.63 yd³ - 0.48 m³ | 630.5 lb - 286 kg |
| 2036 mm (80 in), Bolt-On Teeth | 80.2 in - 2036 mm | 0.63 yd³ - 0.48 m³ | 582 lb - 264 kg |
| 2188 mm (86 in), Bolt-On Cutting Edge | 86.1 in - 2188 mm | 0.82 yd³ - 0.63 m³ | 723.1 lb - 328 kg |
| 2188 mm (86 in), Bolt-On Teeth | 86.1 in - 2188 mm | 0.82 yd³ - 0.63 m³ | 670.2 lb - 304 kg |
| 1576 mm (62 in), Bolt-On Cutting Edge | 62 in - 1576 mm | 1062.6 lb - 482 kg | 20.7 in - 525 mm |
| 1730 mm (68 in), Bolt-On Cutting Edge | 68.1 in - 1730 mm | 1111.1 lb - 504 kg | 20.7 in - 525 mm |
| 1883 mm (74 in), Bolt-On Cutting Edge | 74.1 in - 1883 mm | 1159.6 lb - 526 kg | 20.7 in - 525 mm |
| 2036 mm (80 in), Bolt-On Cutting Edge | 80.2 in - 2036 mm | 1201.5 lb - 545 kg | 20.7 in - 525 mm |
| 1883 mm (74 in), Bolt-On Cutting Edge | 74.1 in - 1883 mm | 0.9 yd³ - 0.69 m³ | 666 lb - 302 kg |
| 2036 mm (80 in), Bolt-On Cutting Edge | 80.2 in - 2036 mm | 0.98 yd³ - 0.75 m³ | 706 lb - 320 kg |
| 2185 mm (86 in), Bolt-On Cutting Edge | 86 in - 2185 mm | 1.1 yd³ - 0.84 m³ | 747 lb - 339 kg |
| 2490 mm (98 in), Bolt-On Cutting Edge | 98 in - 2490 mm | 1.22 yd³ - 0.93 m³ | 822 lb - 373 kg |
| 1421 mm (56 in), Bolt-On Cutting Edge | 56 in - 1421 mm | 0.39 yd³ - 0.3 m³ | 392 lb - 178 kg |
| 1576 mm (62 in), Bolt-On Cutting Edge | 62 in - 1586 mm | 0.44 yd³ - 0.34 m³ | 452 lb - 205 kg |
| 1730 mm (68 in), Bolt-On Cutting Edge | 68 in - 1740 mm | 0.48 yd³ - 0.37 m³ | 512 lb - 232 kg |
| 1883 mm (74 in), Bolt-On Cutting Edge | 74 in - 1893 mm | 0.54 yd³ - 0.41 m³ | 547 lb - 248 kg |
| 2036 mm (80 in), Bolt-On Cutting Edge | 80 in - 2045 mm | 0.58 yd³ - 0.44 m³ | 584 lb - 265 kg |
| 2185 mm (86 in), Bolt-On Cutting Edge | 86 in - 2185 mm | 1.4 yd³ - 1.07 m³ | 805 lb - 365 kg |
| 2490 mm (98 in), Bolt-On Cutting Edge | 98 in - 2490 mm | 1.63 yd³ - 1.25 m³ | 882 lb - 400 kg |
| 2642 mm (104 in), Bolt-On Cutting Edge | 104 in - 2642 mm | 1.74 yd³ - 1.33 m³ | 922 lb - 418 kg |
| MB200 | 0.26 yd³ - 0.2 m³ | 54.6 in - 1386 mm | Standard Flow |
| 1576 mm (62 in) w/Spill Guard, Bolt-On Cutting Edge | 62 in - 1576 mm | 0.39 yd³ - 0.3 m³ | 851 lb - 386 kg |
| 1576 mm (62 in) w/Spill Guard, Bolt-On Teeth | 62 in - 1576 mm | 0.39 yd³ - 0.3 m³ | 817.9 lb - 371 kg |
| 1730 mm (68 in) w/Spill Guard, Bolt-On Cutting Edge | 68.1 in - 1730 mm | 0.44 yd³ - 0.34 m³ | 906 lb - 411 kg |
| 1730 mm (68 in) w/Spill Guard, Bolt-On Teeth | 68.1 in - 1730 mm | 0.44 yd³ - 0.34 m³ | 868.6 lb - 394 kg |
| 1883 mm (74 in) w/Spill Guard, Bolt-On Cutting Edge | 74.1 in - 1883 mm | 0.48 ft³ - 0.37 m³ | 961 lb - 436 kg |
| 1883 mm (74 in) w/Spill Guard, Bolt-On Teeth | 74.1 in - 1883 mm | 0.48 yd³ - 0.37 m³ | 917.1 lb - 416 kg |
| 2036 mm (80 in) w/Spill Guard, Bolt-On Cutting Edge | 80.2 in - 2036 mm | 0.52 ft³ - 0.4 l | 1016 lb - 461 kg |
| 2036 mm (80 in) w/Spill Guard, Bolt-On Teeth | 80.2 in - 2036 mm | 0.52 yd³ - 0.4 m³ | 970 lb - 440 kg |
| 2188 mm (86 in) w/Spill Guard, Bolt-On Cutting Edge | 86.1 in - 2188 mm | 0.56 yd³ - 0.43 m³ | 1071 lb - 486 kg |
| 2188 mm (86 in) w/Spill Guard, Bolt-On Teeth | 86.1 in - 2188 mm | 0.56 yd³ - 0.43 m³ | 1018.5 lb - 462 kg |
| 1576 mm (62 in), Bolt-On Cutting Edge | 62 in - 1576 mm | 0.56 yd³ - 0.43 m³ | 529 lb - 240 kg |
| 1730 mm (68 in), Bolt-On Cutting Edge | 68.1 in - 1730 mm | 0.63 yd³ - 0.48 m³ | 569 lb - 258 kg |
| 1883 mm (74 in), Bolt-On Cutting Edge | 74.1 in - 1883 mm | 0.68 yd³ - 0.52 m³ | 609 lb - 276 kg |
| 1730 mm (68 in) | 68.1 in - 1730 mm | 29.1 in - 739 mm | 35.5 in - 902 mm |
| 1883 mm (74 in) | 74.1 in - 1883 mm | 29.1 in - 739 mm | 35.5 in - 902 mm |
Compactors
Compactors are specifically designed for all compaction operations.
| Model | |||
|---|---|---|---|
| CV117 | 66 in - 1676 mm | 2063.5 lb - 936 kg | Standard Flow |
Hammers
Cat® hydraulic hammers make short work of your demolition, construction, quarry and production breaking needs.
Cat Hammers are high performance breakers, designed to help you get the most from your Cat equipment. With hammer sizes to fit skid steers, backhoes, and all sizes of excavators, you will find the breaker to fill your demolition, construction, quarry and production breaking needs.
| Model | |||
|---|---|---|---|
| B4 | 350.5 lb - 159 kg | 272.9 ft·lbf - 370 J | 2-5 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders |
| B4s | 357.1 lb - 162 kg | 272.9 ft·lbf - 370 J | 2-5 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders |
| B6 | 571 lb - 259 kg | 501.5 ft·lbf - 680 J | 4-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders |
| B6s | 610.7 lb - 277 kg | 501.5 ft·lbf - 680 J | 4-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders |
| B8 | 771 lb - 349.7 kg | 848.2 ft·lbf - 1150 J | 6-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders |
| B8s | 758.4 lb - 344 kg | 848.2 ft·lbf - 1150 J | 6-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders |
| H55s | 760.6 lb - 345 kg | 599.6 ft·lbf - 813 J | 3-6 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders |
| H65s | 859.8 lb - 390 kg | 800.3 ft·lbf - 1085 J | 5-9 Ton Mini Excavators, 216-299 Skid Steer/Compact Track Loaders, 415-444 Backhoe Loaders |
Material Handling
Material handling attachments provide Skid Steer Loader, Backhoe Loader, Telehandler, and Wheel Loader machines with a utility tool useful in road construction, pipe laying and other contracting jobs.
| Model | |||
|---|---|---|---|
| Material Handling Arm | 51.8 in - 1316 mm | 1999.6 lb - 907 kg | 84 in - 2134 mm |
Rakes
Rakes are versatile work tools for land clearing, brush piling and site preparation.
| Model | |||
|---|---|---|---|
| 1829 mm (72 in) | 72 in - 1829 mm | 33 in - 838 mm | 1069.9 lb - 485.29 kg |
| 2137 mm (84 in) | 84 in - 2134 mm | 33 in - 838 mm | 1115.1 lb - 505.79 kg |
| LR116 | 62 in - 1576 mm | 0.4 yd³ - 0.31 m³ | 1311.7 lb - 595 kg |
Tillers
Landscape Tillers break up and mix soil in landscaping applications.
| Model | |||
|---|---|---|---|
| LT114 | 53.3 in - 1354 mm | 25-152 mm (1-6 in) | 925.9 lb - 420 kg |
Trenchers
Trenchers are designed for cutting narrow, straight trenches.
| Model | |||
|---|---|---|---|
| T109 Hydraulic Side Shift | 36 in - 914 mm | 6 in - 152 mm | Rockfrost |
| T109 Hydraulic Side Shift | 36 in - 914 mm | 8 in - 203 mm | Standard |
| T109 Hydraulic Side Shift | 36 in - 914 mm | 6 in - 152 mm | Standard |
| T112 Hydraulic Side Shift | 48 in - 1219 mm | 6 in - 152 mm | Standard |
| T315 Hydraulic Side Shift | 60 in - 1524 mm | 6 in - 152 mm | Standard |
| T109 Hydraulic Side Shift | 36 in - 914 mm | 6 in - 152 mm | Terminator |
| T109 Hydraulic Side Shift | 36 in - 914 mm | 6 in - 152 mm | Combo |
| T109 Manual Side Shift | 36 in - 914 mm | 6 in - 152 mm | Combo |
| T109 Manual Side Shift | 36 in - 914 mm | 6 in - 152 mm | Terminator |
| T109 Manual Side Shift | 36 in - 914 mm | 6 in - 152 mm | Rockfrost |
| T109 Manual Side Shift | 36 in - 914 mm | 6 in - 152 mm | Standard |
| T109 Manual Side Shift | 36 in - 914 mm | 8 in - 203 mm | Standard |
| T112 Hydraulic Side Shift | 48 in - 1219 mm | 8 in - 203 mm | Standard |
| T112 Hydraulic Side Shift | 48 in - 1219 mm | 6 in - 152 mm | Rockfrost |
| T112 Hydraulic Side Shift | 48 in - 1219 mm | 6 in - 152 mm | Combo |
| T112 Manual Side Shift | 48 in - 1219 mm | 6 in - 152 mm | Combo |
| T112 Manual Side Shift | 48 in - 1219 mm | 6 in - 152 mm | Standard |
| T112 Manual Side Shift | 48 in - 1219 mm | 6 in - 152 mm | Rockfrost |
Snow Products
Cat® Snow Products handle the toughest snow removal jobs.
| Model | |||
|---|---|---|---|
| 2.44 m (8 ft) | 96 in - 2438 mm | 778.2 lb - 353 kg | 43.7 in - 1109 mm |
| 3.05 m (10 ft) | 120 in - 3048 mm | 866.4 lb - 393 kg | 43.7 in - 1109 mm |
| 3.66 m (12 ft) | 144 in - 3658 mm | 952.4 lb - 432 kg | 43.7 in - 1109 mm |
| 2.44 m (8 ft) | 96 in - 2438 mm | 1082.5 lb - 491 kg | 45 in - 1143 mm |
| 2.44 m (8 ft) | 96 in - 2438 mm | 1036.2 lb - 470 kg | 45 in - 1143 mm |
| 3.05 m (10 ft) | 120 in - 3048 mm | 1153 lb - 523 kg | 45 in - 1143 mm |
| 3.05 m (10 ft) | 120 in - 3048 mm | 1201.5 lb - 545 kg | 45 in - 1143 mm |
| 3.66 m (12 ft) | 144 in - 3658 mm | 1347 lb - 611 kg | 45 in - 1143 mm |
| 3.66 m (12 ft) | 144 in - 3658 mm | 1402.1 lb - 636 kg | 45 in - 1143 mm |
Saws
Ideal for asphalt patch cutting, road expansion join cuts, and utility trenching.
| Model | |||
|---|---|---|---|
| SW345, 80 mm (3 in) | 17.7 in - 450 mm | 3.1 in - 80 mm | 2482.4 lb - 1126 kg |
| SW345, 130 mm (5 in) | 17.7 in - 450 mm | 5.1 in - 130 mm | 2239.9 lb - 1016 kg |
Mulchers
Mulchers are ideal for efficient cutting and mulching of vegetation and overgrowth.
| Model | |||
|---|---|---|---|
| HM215 | 69.2 in - 1758 mm | 58.3 in - 1480 mm | 48 in - 1219 mm |
Bale Spears
Cat® Bale Spears are ideal for hay bales, both round and square as well as other baled material in agriculture applications..
| Model | |||
|---|---|---|---|
| 890 mm (35 in) | 50.6 in - 1285 mm | 22.4 in - 570 mm | 2004 lb - 909 kg |
| 890 mm (35 in) | 55.4 in - 1407 mm | 51.8 in - 1315 mm | 3007.1 lb - 1364 kg |
| 1140 mm (45 in) | 50.6 in - 1285 mm | 22.4 in - 570 mm | 2004 lb - 909 kg |
| 1140 mm (45 in) | 55.4 in - 1407 mm | 51.8 in - 1315 mm | 3007.1 lb - 1364 kg |
Bale Grabs
Cat® Bale Grabs safely grab and carry square or round baled material.
| Model | |||
|---|---|---|---|
| 1803 mm (71 in) | 55.2 in - 1401 mm | 34.4 in - 873 mm | 71 in - 1803 mm |
| 2133 mm (84 in) | 55.2 in - 1401 mm | 34.4 in - 873 mm | 84 in - 2133 mm |
Forks
Cat® forks are the ideal choice for a wide variety of applications.
| Model | |||
|---|---|---|---|
| 1676 mm (66 in) | 66 in - 1676 mm | 31.9 in - 810 mm | 38 in - 965 mm |
| 1829 mm (72 in) | 72 in - 1829 mm | 32 in - 814 mm | 38 in - 965 mm |
| 1160 mm (46 in) | 35.9 in - 912 mm | 46 in - 1160 mm | 49.9 in - 1268 mm |
| 1676 mm (66 in) | 66 in - 1676 mm | 22.9 in - 581 mm | 436.5 lb - 198 kg |
| 1829 mm (72 in) | 72 in - 1829 mm | 22.9 in - 581 mm | 485 lb - 220 kg |
| 1676 mm (66 in) | 66 in - 1676 mm | 30.3 in - 770 mm | 34.5 in - 876 mm |
| 1829 mm (72 in) | 72 in - 1829 mm | 30.3 in - 770 mm | 34.5 in - 876 mm |
