Leasing calculator - will allow you to calculate the cost of your monthly payment. Калькулятор лизинга
Запчасти онлайн
 
 
 
 
 

938K

938K

The Cat® 938K Wheel Loader sets a new standard for productivity, fuel efficiency and comfort. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day long. The new optimized Z-bar loader linkage delivers the performance and breakout forces of a traditional Z-bar linkage with the parallelism and load handling capability of a tool carrier. Experience the new industry benchmark.

Rated Net Power 126 kW
Operating Weight 15146 kg
Bucket Capacities 2.5 m3 - 5.0 m3 3.3 yd3 - 6.5 yd3

Технические характеристики

Engine
Rated Net Power 126 kW
Model Cat® C7.1 ACERT™
SAE J1349 136 kW
ISO 9249 (1997) 137 kW
EEC 80/1269 137 kW
Bore 105 mm
Stroke 135 mm
Displacement 7 l
Net Torque 874 N·m
Weights
Operating Weight 15146 kg
Buckets
Bucket Capacities 2.5 m3 - 5.0 m3 3.3 yd3 - 6.5 yd3
Dimensions
Wheel Base 3050 mm
Height - Top of ROPS/FOPS 3340 mm
Height - Center of Axle 685 mm
Ground Clearance 386 mm
Overall Length 7604 mm
Length - Rear Axle to Bumper 1968 mm
Centerline of Front Axle to Hitch 1525 mm
Wheel Base Length 3050 mm
Dump Clearance at Maximum Lift - 45° 2869 mm
Bucket Pin Height - Maximum Lift 3969 mm
Overall Height - Bucket Raised 5242 mm
Reach at Maximum Lift and 45° Dump 1108 mm
Rack Back Angle - Maximum Lift 54 °
Dump Angle at Maximum Lift 49 °
Rack Back Angle - Carry 45 °
Carry Height 467 mm
Digging Depth 100 mm
Operating Specifications
Static Tipping Load - Full Turn 9698 kg
Reach - Full Lift and 45° Dump 1108 mm
Dump Clearance at Full Lift and 45° Dump Angle 2869 mm
Articulation Angle 40 °
Steering
Steering Articulation 40 °
Steering Angle - Each Direction 40 °
Steering Cylinder, Two, Bore 80 mm
Maximum Working Pressure 24130 kPa
Loader Hydraulic System
Hydraulic Cycle Time 9.7 s
Pump Flow - Implement Pump 190 l/min
Maximum Working Pressure 28000 kPa
Hydraulic Cycle Time 9.7 sec
Raise 5.5 s
Dump 1.5 s
Lower, Empty, Float Down 2.7 s
Total 9.7 s
Bore (2) 150 mm
Bore (1) 120 mm
Stroke (1) 789 mm
Stroke (2) 555 mm
Transmission
Standard Transmission Maximum Travel Speeds 40 km/h
Forward - 1 13 km/h
2 13 km/h
3 27 km/h
4 40 km/h
Reverse - 1 13 km/h
Service Refill Capacities
Fuel Tank 195 l
Cooling System 32 l
Crankcase 19.5 l
Transmission 11 l
Front 35 l
Rear 35 l
Hydraulic System - Including Tank 170 l
Hydraulic Tank 90 l
Cab
ROPS SAE J1040 MAY94, ISO 3471-1994
FOPS SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II

Преимущества и особенности

Parallel Lift Loader Linkage

Optimized Z-bar Linkage

The new optimized patent-pending Z-bar linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility.

  • Parallel lift and high tilt forces throughout the working range help you safely and confidently handle loads with precise control.
  • Linkage features excellent visibility to the bucket cutting edge and fork tips.

Industry Leading Operator Station

Best Seat on the Job Site

Enjoy all day comfort in the spacious new K Series cab:

  • Extremely low sound levels.
  • Superior visibility to the work tool due to wide curved windshield, redesigned Z-bar linkage, lines routing and work tool design.
  • Automatic temperature control.
  • Seat-mounted, ergonomic joystick for lift and tilt functions. Joystick includes integrated Forward/Neutral/Reverse switch and optional differential lock trigger, third and fourth function auxiliary hydraulics.
  • Easy access to the cab with ergonomically placed grab rails, walk-up steps and large platform.

Easy to Use Instrument Panel and Display

An optional secondary display provides easy access to vital machine parameters and works in conjunction with the standard soft touch panel to allow real time adjustments.

  • Machine information and diagnostics at a glance.
  • Real time and historic fuel usage.
  • Backup camera display.
  • Help button plus 22 language capability.
  • Adjustment of functions such as creep, third function flow, throttle and rimpull.

Power Train

Intelligent Power Management

The Caterpillar exclusive Intelligent Power Management system actively monitors operator input and power availability to keep the machine working at peak efficiency.

Engine

The Cat® C7.1 ACERT™ engine provides cleaner, quieter operation while delivering superior performance and durability. The engine meets U.S. EPA Tier 3 and EU Stage IIIA emission requirements. Maximum engine speed is now 1,800 rpm for reduced fuel consumption and lower sound levels. The engine also features:

  • Class-leading fuel efficiency, significantly reducing owning and operating costs.
  • Configurable auto idle shut down feature as standard equipment.

Transmission

A smooth, step-less electronically controlled hydrostatic transmission provides adjustable power to the ground and superb groundspeed control for a multitude of tasks.

  • Four speed ranges ensure maximum controllability for any task.
  • Rimpull control enables you to match available tractive power to underfoot conditions, helping reduce tire wear.
  • Creeper control lets you adjust machine groundspeed when using work tools such as brooms, snow blowers and brushcutters.
  • Throttle lock feature allows you to maintain constant engine RPM regardless of machine speed.

Axles and Brakes

Available fully locking front differential axles and open rear differentials can be engaged at full torque on the go with a button on the joystick. Brake system includes independent service brakes on front and rear axles and a spring applied, electronically activated park brake.

Hydraulics

Load-Sensing Hydraulic System

K Series machines feature a new electro-hydraulic control system that is governed by the Intelligent Power Management system. The load-sensing, variable flow system senses work demand and adjusts flow and pressure to match. This allows full hydraulic forces at any engine speed.

  • Programmable in-cab kick-outs are easy to set on the go for tilt, lower and lift. This feature is ideal for applications where the work cycle is repeatable.
  • Caterpillar exclusive electro-hydraulic snubbing at programmed kickouts and rack/dump stops greatly improves operator comfort and component life in addition to improved material retention.
  • Adjustable third function flow through the secondary display (when equipped) for use with hydro-mechanical work tools.
  • Optional Ride Control System provides an even smoother ride and excellent material retention.
  • Designed with dedicated pumps for steering and implements so there is no compromise in cycle times and efficiency for multi-function operation.

Work Tools

The Right Tool for the Job

An extensive range of work tools and bucket styles are available to make your Cat Wheel Loader one of the most versatile machines on the job site.

Performance Series Buckets

Performance Series Buckets utilize a system-based approach to balance bucket shape with the machine's linkage, weight, lift and tilt capacities. They deliver higher fill factors and better material retention for significant productivity and fuel efficiency improvements. The buckets feature a longer floor, open throat and curved side bars.

Additional Buckets

  • Light Material
  • Multi Purpose
  • Sand and Gravel
  • High Dump
  • Wood Chip

Material Handling Work Tools

  • Pallet Forks
  • Construction Forks
  • Material Handling Arm

Work Tools for Special Applications

  • Dozer Blades
  • Snow Plows
  • Brooms
  • Rakes
  • Log and Lumber Forks
  • Pipe and Pole Forks
  • Side Dump Buckets
  • Grapple Buckets
  • Grading Buckets

Couplers

The Cat Fusion™ interface provides coupler flexibility without compromise in breakout force and dump clearance. The advanced wedging mechanism creates a tight, rattle-free fit, eliminating play and wear for long service life. The open coupler frame design provides excellent line of sight to the work tool. An ISO 23727 coupler interface is also available for use with competitive work tools.

Options

Configure the Machine the Way You Want It

A variety of options are available on the Cat K Series Wheel Loaders to suit your specific application needs. See your Cat dealer for more information about the features below and additional options.

  • Coupler Options
  • Counterweight Options
  • HID Lights
  • Turbine Precleaner
  • Rear Camera in Grill
  • Guards
  • 3rd and 4th Function Hydraulics

Additional options include:

  • Power Train Side Guards
  • Driveshaft Guard
  • Rear Waste Gate
  • RESPA Cab Filtration
  • Lower Power Train Guard
  • Crankcase Guard
  • Optional Toolbox

Serviceability

Easy Service Access

All service points are accessible from ground level. Three large service doors can be opened and closed in any order to give full access to filters and service points. Extended service intervals reduce service time and maximize uptime. Additional service features include:

  • Caterpillar exclusive electric fuel priming pump.
  • Jump start studs as standard equipment.
  • Single plane cooling system with 6 fins per inch coolers as standard.
  • Swing-up air conditioner condenser for easy clean out.
  • Product Link ready (standard).

Customer Support

Renowned Cat Dealer Support

Your Cat dealer is ready to help you every step of the way. From new or used machine sales, to rental or rebuild options, your Cat dealer can provide an optimal solution to your business needs. Unsurpassed worldwide parts availability, trained technicians and customer support agreements maximize your machine uptime.

Стандартное оборудование

  • POWER TRAIN
    • Axle seal guards
    • Auto idle shut down feature
    • Brake/decelerator pedal
    • Cat C6.6 ACERT™ engine
    • Coolant protection to -34° C (-29° F)
    • Differential lock in front axle
    • Differential rear open
    • Dry type air cleaner
    • Enclosed wet disc full hydraulic brakes
    • Fuel priming pump, automatic
    • Fuel water separator
    • Hydraulically driven demand cooling fan
    • Hydrostatic transmission with electronic speed range control
    • Lubed for life driveshafts
    • Parking brake, electric
    • Single plane cooling system with remote coolant reservoir
    • S•O•S port, engine, coolant and transmission oil
    • Thermal starting aid (glow plugs)
    • Throttle lock
    • Transmission directional control on implement joystick
    • Transmission sight gauge
    • Transmission oil cooler
  • HYDRAULICS
    • Heavy duty hydraulic cooler
    • Hydraulic diagnostic connectors and S•O•S
    • Hydraulic sight gauge, visible
    • Load sensing hydraulics and steering
    • Seat-mounted hydraulic controls with F/N/R
  • ELECTRICAL
    • Alternator, 115-amp, heavy duty
    • 12V power supply in cab (2)
    • Batteries, 1,000 CCA (2)
    • 24 volt system
    • Back-up alarm
    • Battery disconnect switch
    • Beacon ready
    • Diagnostic connector
    • Directional signals front and rear
    • Emergency shutdown switch
    • Halogen work lights front and rear
    • Heavy duty gear reduction starter
    • LED rear stop tail turn lights
    • Remote jump start post
    • Resettable main and critical function breakers
    • Roading lights front and rear
  • OPERATOR ENVIRONMENT
    • 75 mm (3 in) retractable seatbelt
    • Automatic temperature control
    • Cab, enclosed ROPS/FOPS pressurized and sound suppressed
    • Cup holder
    • External heated mirrors
    • Ground level cab door release
    • Gauges: • Digital direction indicator • Digital hour meter and odometer • Digital speedometer • Engine coolant temperature gauge • Fuel level indicator • Hydraulic oil temperature gauge • Tachometer
    • Hydraulic control lockout
    • Interior cab lighting, door and dome
    • Interior rearview mirrors (2)
    • Lunch box storage
    • Operator warning system indicators
    • Radio ready speakers
    • Rear window defrost, electric
    • Removable floormat
    • Seat-mounted electronic implement controls, adjustable
    • Sliding glass on the side windows
    • Steering column mounted multi function control - lights, wipers, turn signal
    • Suspension seat, fabric
    • Tilt and telescopic steering wheel
    • Tinted front glass
    • Wet arm wiper/washer, 2-speed and intermittent, front
    • Wet arm wiper/washer, rear
  • OTHER STANDARD EQUIPMENT
    • Automatic bucket/fork positioner, adjustable in-cab
    • Automatic lift and bucket kickouts, adjustable in-cab
    • Fenders
    • Large-access enclosure doors with adjustable close/open force
    • Parallel lift loader linkage with sealed pins
    • Recovery hitch with pin
    • Remote mounted lubrication points
    • Toolbox, lockable
    • Vandalism protection - lockable compartments
  • EU STANDARD EQUIPMENT
    • Deluxe cab
    • Secondary display
    • Rearview camera

Дополнительное оборудование

  • Cab, deluxe includes:
    • Automatic blower control
    • Electrically adjustable external heated mirrors (2)
    • LED interior lighting
    • Secondary display
    • Visor
  • Cold start package:
    • Ether starting aid
    • Block heater
    • Additional batteries (2)
  • Guards
    • Power train, lower
    • Power train, side
    • Crankcase
    • Driveshaft
    • Windshield
  • Radio packages:
    • Radio ready with Bluetooth interface, microphone and auxiliary inputs for MP3 players
    • Radio, AM/FM with CD player
    • Radio, AM/FM with CD player deluxe, Bluetooth interface, microphone and auxiliary inputs for MP3 players
  • Seats:
    • Deluxe seat - fully adjustable fabric air suspension seat with high seat backrest
  • Steering:
    • Dual mode
    • Secondary