Технические характеристики
| Maximum Gross Power | 75 kW |
| Engine Model | Cat C4.4 |
| Maximum Gross Power - Maximum Engine Speed | 2350 r/min |
| Maximum Gross Power - SAE J1995 | 76 kW |
| Maximum Gross Power - ISO 14396 | 75 kW |
| Maximum Gross Power - ISO 14396 (DIN) | 75 kW |
| Rated Net Power - Rated Engine Speed | 2200 r/min |
| Rated Net Power - SAE J1349 | 73 kW |
| Rated Net Power - ISO 9249 | 74 kW |
| Rated Net Power - ISO 9249 (DIN) | 74 kW |
| Displacement | 4.4 l |
| Bore | 105 mm |
| Stroke | 127 mm |
| Maximum Gross Torque - SAE J1995 | 415 N·m |
| Maximum Gross Torque - ISO 14396 | 410 N·m |
| Maximum Net Torque - SAE J1349 | 400 N·m |
| Maximum Net Torque - ISO 9249 | 405 N·m |
| Emissions | Engine meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3/EU Stage IIIA. |
| Note | Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. |
| Operating Weight | 8568 kg |
| Bucket Capacities | 1.6-3.5 m3 (2.1-4.6 yd3) |
| General Purpose | 1.6-1.9 m3 (2.1-2.5 yd3) |
| Light Material | 2.5-3.5 m³ (3.2-4.6 yd³) |
| Steering Articulation Angle - Each Direction | 40 ° |
| Maximum Flow - Steering Pump | 82 l/min |
| Maximum Working Pressure - Steering Pump | 20000 kPa |
| Steering Cycle Times - Lock to Lock - At 2,350 rpm | 2.3 s |
| Number of Steering Wheel Turns - Lock to Lock | 3.4 turns |
| Maximum Flow - Implement Pump | 148 l/min |
| Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard | 95 l/min |
| Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High | 120 l/min |
| Maximum Flow - Implement Pump - 4th Function, Maximum Flow | 95 l/min |
| Maximum Working Pressure - Implement Pump | 28000 kPa |
| Relief Pressure - Tilt Cylinder | 32000 kPa |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure | 28000 kPa |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure | 25000 kPa |
| Hydraulic Cycle Time - Maximum Engine Speed - Raise, Ground Level to Maximum Lift | 5.2 s |
| Hydraulic Cycle Time - Maximum Engine Speed - Dump, at Maximum Reach | 1.4 s |
| Hydraulic Cycle Time - Maximum Engine Speed - Rack Back | 2.2 s |
| Hydraulic Cycle Time - Maximum Engine Speed - Float Down, Maximum Lift to Ground Level | 3.7 s |
| Hydraulic Cycle Time - Maximum Engine Speed - Total Cycle Time | 12.5 s |
| Fuel Tank | 154 l |
| Cooling System | 21.5 l |
| Engine Crankcase | 9 l |
| Axles - Front Center Differential | 7.5 l |
| Axles - Rear Center Differential | 7.5 l |
| Hydraulic System - Including Tank | 98 l |
| Hydraulic Tank | 55 l |
| Transmission | 3.4 l |
| Forward and Reverse - Low Range, Speed Range 1* | 10 km/h |
| Forward and Reverse - Low Range, Speed Range 2* | 20 km/h |
| Note | *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. |
| Standard Size | 17.5-25 16 PR (L-3) |
| Other Choices Include | 17.5-25 12 PR (L-2), 1PC Rim; 17.5-25 12 PR (L-3), 1PC Rim; 17.5R-25, radial (L-3), 1 or 3PC Rim |
| Note (1) | Tire options may vary by region. Contact your Cat dealer for details. |
| Note (2) | In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities. |
| Note (3) | Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
| ROPS | ISO 3471:2008 |
| FOPS | ISO 3449:2005 Level II |
| Note (1) | Cab and Rollover Protective Structures (ROPS) are standard. |
| Note (2) | The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A). |
| Note (3) | The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A). |
| Note (4) | *The measurements were conducted with the cab doors and windows closed. |
| Front | Fixed; Locking differential (standard) |
| Rear | Oscillating ±11 degrees; Locking differential (standard) |
Преимущества и особенности
High Performance
With its high full turn tipping loads and breakout forces, the K Series delivers a powerful solution for all customer applications.
Ease of Operation
State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust machine responsiveness with the push of a button, which allows the operator to set up the machine exactly the way they want it based on the application.
Parallel Lift Loader Linkage
The Cat® Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.
Стандартное оборудование
-
POWER TRAIN
- Cat C4.4 mechanical engine
- Electric fuel pump with four micron filtration
- S·O·SSM port, transmission oil
- Hydrostatic transmission, 20 km/h (12.5 mph)
- Lubed for life universal joints
- Forward – Neutral – Reverse on joystick
- 100% locking differentials, while moving
-
Brakes, service
– Enclosed, wet-disc full hydraulic
- Brakes, parking (also secondary brake)
- Radiator, serviceable core, single plane
- Air cleaner, radial seal, dual filters
- Air inlet heater starting aid
- Cooling fan, hydraulic
- Radiator expansion tank
- Tires, 17.5-25, 16PR (L-3)
-
LOADER
- Parallel lift, Z-bar loader
- Ground access grease points
-
HYDRAULICS
- Automatic lift kickouts
- Priority steering
- Hydraulics, two valve, one joystick
- Hydraulic diagnostic pressure taps
- S·O·S port, hydraulic oil
- Hydraulic oil cooler – single plane
- Hydraulically driven cooling fan
- Pump, variable displacement piston
-
ELECTRICAL
- 80-ampere alternator
- One 850 CCA maintenance free battery
- Halogen flood lights (front and rear)
- Directional signals (front and rear)
- 12-volt direct electric starting
- Ignition key start/stop switch
- Switch, battery disconnect key
- Product Link™ ready wiring
-
OPERATOR ENVIRONMENT
- ROPS/FOPS cab, pressurized and sound suppressed
- Hydraulic control lever lockout
-
Gauges
– Engine coolant temperature
– Hydraulic oil temperature
– Fuel level
– Speedometer
– Digital hour meter
-
Operator warning system indicators:
– Brake charge pressure low
– Engine malfunction
– Park brake applied
– Electrical system voltage low
– Hydraulic oil filter bypass
– Action indicator
- Interior light
- Door
-
Seat
– Fabric only
– Adjustable height, backrest, armrest
– Seat belt, retractable 51 mm (2 in)
- Heater/defroster
- Wiper/washer front (intermittent)
- Wiper/washer rear
- Tinted front glass, laminated
- Adjustable steering column
- Rearview mirrors, exterior (two)
- Ground level door release
-
FLUIDS
- Extended life coolant antifreeze, protected to –36° C (–33° F)
- Cat Advanced HYDO™ 10
-
CHASSIS
- Fenders, front
- Engine enclosure – lockable
- Recovery hitch
- Vandalism protection – locked service points
- Counterweight
-
REGIONAL STANDARDS (as required)
- Alarm, back-up alarm
- License plate mount
- Serial number, engine block stamp
Дополнительное оборудование
-
OPTIONAL EQUIPMENT
- Integrated Toolcarrier (IT), standard coupler
- Lights, roading, dip
- Lights, cab, working (four)
-
Feature package, load
– Return to Dig, Lift Kickout, Implement Modulation, Throttle Lock, Rimpull Control, Hystat aggressiveness
-
Feature package, road
– Ride Control, Implement Modulation, Throttle Lock, Rimpull Control, Hystat aggressiveness, Creeper Control
-
Feature package, load and road
– - Ride Control, Return to Dig, Lift Kickout, Implement Modulation, Throttle Lock, Rimpull Control, Hystat aggressiveness, Creeper Control
- Seat belt, retractable 75 mm (3 in)
- Heater and air conditioner
- Security system, machine
- Year of manufacture plate
- Beacon, rotating
- Alarm, back-up
- Product Link
- License plate mount
- Tire Options
- Steering, secondary
- Seats (deluxe/premium/vinyl)
- Auxiliary hydraulics (3rd and 4th functions)
- Battery, heavy duty
- Fenders, rear
- Rearview camera
- Radio
- Toolbox
- Rear blind
- Guards (lights, hitch, power train, driveshaft, crankcase)
- Reversing fan
- NOTE: Not all features are available in all regions. See your Cat dealer for more information.
Сопутствующие товары
Buckets - Compact Wheel Loader
Compact Wheel Loader buckets have been integrally designed with the Cat® Compact Wheel Loader to ensure the total system provides superior performance and value on every job.
| Модель | |||
|---|---|---|---|
| 1.5 m3 (2.0 yd3), ISO Coupler, Weld-On Teeth | 95.8 in - 2434 mm | 1490.1 lb - 675.9 kg | 42.2 in - 1073 mm |
| 1.6 m3 (2.1 yd3), ISO Coupler, Bolt-On Cutting Edge | 94.5 in - 2401 mm | 1492.1 lb - 676.79 kg | 42.5 in - 1080 mm |
| 1.6 m3 (2.1 yd3), ISO Coupler, Weld-On Teeth | 95.8 in - 2434 mm | 1377.9 lb - 625 kg | 40.3 in - 1023 mm |
| 1.7 m3 (2.2 yd3), ISO Coupler, Bolt-On Cutting Edge | 94.5 in - 2401 mm | 1524.9 lb - 691.7 kg | 42.5 in - 1080 mm |
| 1.8 m3 (2.4 yd3), ISO Coupler, Weld-On Teeth | 95.8 in - 2434 mm | 1490.1 lb - 675.9 kg | 45.4 in - 1152 mm |
| 1.9 m3 (2.5 yd3), ISO Coupler, Bolt-On Cutting Edge | 94.5 in - 2401 mm | 1436.1 lb - 651.4 kg | 45.6 in - 1159 mm |
| 1.2 m3 (1.6 yd3), IT Coupler, Bolt-On Teeth | 95.6 in - 2429 mm | 1129 lb - 512.09 kg | 43 in - 1093 mm |
| 1.2 m3 (1.6 yd3), ISO Coupler, Bolt-On Teeth | 95.6 in - 2429 mm | 1168.9 lb - 530.2 kg | 43 in - 1093 mm |
| 1.3 m3 (1.7 yd3), IT Coupler, Bolt-On Cutting Edge | 94.5 in - 2401 mm | 1220.9 lb - 553.79 kg | 42.5 in - 1080 mm |
| 1.3 m3 (1.7 yd3), ISO Coupler, Bolt-On Cutting Edge | 94.5 in - 2401 mm | 1261 lb - 572 kg | 42.5 in - 1080 mm |
| 1.3 m3 (1.7 yd3), Pin On, Bolt-On Teeth | 95.6 in - 2429 mm | 1184.1 lb - 537.09 kg | 43 in - 1093 mm |
| 1.4 m3 (1.8 yd3), Pin On, Bolt-On Cutting Edge | 94.5 in - 2401 mm | 1276 lb - 578.79 kg | 42.5 in - 1080 mm |
| 1.4 m3 (1.8 yd3), IT Coupler, Bolt-On Teeth | 95.6 in - 2429 mm | 1173.1 lb - 532.09 kg | 43 in - 1093 mm |
| 1.4 m3 (1.8 yd3), ISO Coupler, Bolt-On Teeth | 95.6 in - 2429 mm | 1213 lb - 550.2 kg | 43 in - 1093 mm |
| 1.5 m3 (2.0 yd3), ISO Coupler, Bolt-On Cutting Edge | 94.5 in - 2401 mm | 1304.9 lb - 591.9 kg | 42.5 in - 1080 mm |
| 1.5 m3 (2.0 yd3), IT Coupler, Bolt-On Teeth | 95.6 in - 2429 mm | 1250 lb - 567 kg | 43 in - 1093 mm |
| 1.5 m3 (2.0 yd3), Pin On, Bolt-On Teeth | 95.6 in - 2429 mm | 1270.1 lb - 576.09 kg | 43 in - 1093 mm |
| 1.6 m3 (2.1 yd3), IT Coupler, Bolt-On Cutting Edge | 94.5 in - 2401 mm | 1362 lb - 617.79 kg | 42.5 in - 1080 mm |
| 1.6 m3 (2.1 yd3), Pin On, Bolt-On Cutting Edge | 94.5 in - 2401 mm | 1342 lb - 608.7 kg | 42.5 in - 1080 mm |
| 1.6 m3 (2.1 yd3), IT Coupler, Bolt-On Teeth | 95.6 in - 2428 mm | 1300.9 lb - 590.09 kg | 45.8 in - 1163 mm |
| 1.6 m3 (2.1 yd3), ISO Coupler, Bolt-On Teeth | 95.6 in - 2428 mm | 1341 lb - 608.29 kg | 46.1 in - 1171 mm |
| 1.7 m3 (2.2 yd3), IT Coupler, Bolt-On Cutting Edge | 94.5 in - 2401 mm | 1393.1 lb - 631.9 kg | 45.6 in - 1159 mm |
| 1.7 m3 (2.2 yd3), ISO Coupler, Bolt-On Cutting Edge | 94.5 in - 2401 mm | 1433 lb - 650 kg | 45.6 in - 1159 mm |
| 1.9 m3 (2.5 yd3), IT Coupler, Bolt-On Cutting Edge | 94.5 in - 2401 mm | 1470 lb - 666.79 kg | 45.6 in - 1159 mm |
| 1.9 m3 (2.5 yd3), ISO Coupler, Bolt-On Cutting Edge | 94.5 in - 2401 mm | 1470 lb - 666.79 kg | 45.6 in - 1159 mm |
Material Handling
Material handling attachments provide Skid Steer Loader, Backhoe Loader, Telehandler, and Wheel Loader machines with a utility tool useful in road construction, pipe laying and other contracting jobs.
| Модель | |||
|---|---|---|---|
| 3941 mm (155 in) | 26 in - 660 mm | 4618.7 lb - 2095 kg | 155.2 in - 3941 mm |
| 4203 mm (165 in) | 29.8 in - 758 mm | 5361.6 lb - 2432 kg | 165.7 in - 4208 mm |
Snow Products
Cat® Snow Products handle the toughest snow removal jobs.
| Модель | |||
|---|---|---|---|
| 3.05 m (10 ft) | 120 in - 3048 mm | 1803.4 lb - 818 kg | 50.4 in - 1279 mm |
| 3.05 m (10 ft) | 120 in - 3048 mm | 1995.2 lb - 905 kg | 69.1 in - 1755 mm |
| 3.66 m (12 ft) | 144 in - 3658 mm | 1995.2 lb - 905 kg | 50.4 in - 1279 mm |
| 3.66 m (12 ft) | 144 in - 3658 mm | 2184.8 lb - 991 kg | 69.1 in - 1755 mm |
| 3.05 m (10 ft) | 120 in - 3048 mm | 1677.7 lb - 761 kg | 50.4 in - 1279 mm |
| 3.05 m (10 ft) | 120 in - 3048 mm | 1865.1 lb - 846 kg | 69.1 in - 1755 mm |
| 3.66 m (12 ft) | 144 in - 3658 mm | 1865.1 lb - 846 kg | 50.4 in - 1279 mm |
| 3.66 m (12 ft) | 144 in - 3658 mm | 2054.7 lb - 932 kg | 69.1 in - 1755 mm |
Forks
Cat® forks are the ideal choice for a wide variety of applications.
| Модель | |||
|---|---|---|---|
| 1550 mm (61 in) | 36.8 in - 935.09 mm | 61 in - 1550 mm | 539 lb - 244.5 kg |
