Technicial Specifications
Engine
Operating Specifications
Transmission
Hydraulic System - Lift/Tilt
Hydraulic System - Steering
Service Refill Capacities
Air Conditioning System
Axles
Brakes
Sound Performance - Tier 4 Final/EU Stage V - Standard
Sound Performance - Tier 4 Final/EU Stage V - Suppression
Dimensions
Scoops
Engine Model | Cat® C18 |
Rated Speed | 1900 r/min |
Peak Power Speed | 1500 r/min |
Gross Power - SAE J1995 | 419 kW |
Net Power - SAE J1349 | 370 kW |
Bore | 145 mm |
Stroke | 183 mm |
Displacement | 18.1 l |
Peak Torque - 1,300 rpm | 2836 N·m |
Torque Rise | 52 % |
Emissions | U.S. EPA Tier 4 Final and EU Stage V emission standards or equivalent to U.S. EPA Tier 3 and U.S. EPA Tier 2. |
Operating Weight | 47750 kg |
Blade Capacities | 7.9 – 22.2 m3 (10.3 – 29.0 yd3) |
Coal Scoop Operating Weight | 51103 kg |
Chip Scoop Operating Weight | 112838 kg |
Transmission Type | Cat planetary power shift |
Forward - 1 | 6.8 km/h |
Forward - 2 | 11.6 km/h |
Forward - 3 | 20.3 km/h |
Forward - 4 | 35.4 km/h |
Reverse - 1 | 6.8 km/h |
Reverse - 2 | 12.2 km/h |
Reverse - 3 | 21.4 km/h |
Direct Drive - Forward 1 | Lock-up disabled |
Direct Drive - Forward 2 | 12.4 km/h |
Direct Drive - Forward 3 | 22.1 km/h |
Direct Drive - Forward 4 | 38.5 km/h |
Direct Drive - Reverse 1 | 7.2 km/h |
Direct Drive - Reverse 2 | 13 km/h |
Direct Drive - Reverse 3 | 23 km/h |
Lift/Tilt System - Circuit | Pilot operated LS valve with EH |
Lift/Tilt System | Variable displacement piston |
Maximum Flow at 1,900 rpm | 582 l/min |
Relief Valve Setting - Lift/Tilt | 32000 kPa |
Cylinders, Double Acting - Lift, Bore and Stroke | 139.75 mm × 1021 mm (5.5 in × 40.2 in) |
Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke | 140 mm × 230 mm (5.5 in × 9.1 in) |
Pilot System | Variable displacement piston |
Pilot Maximum Flow | 52 l/min |
Pilot Relief Valve Setting | 4000 kPa |
Steering System - Circuit | Pilot, load sensing |
Steering System - Pump | Piston, variable displacement |
Maximum Flow | 250 l/min |
Relief Valve Setting - Steering | 24100 kPa |
Total Steering Angle | 86 ° |
Steering Cycle Times - High Idle | 3.1 s |
Steering Cycle Times - Low Idle | 5.7 s |
Fuel Tank | 793 l |
Cooling System | 120 l |
Crankcase | 60 l |
Diesel Exhaust Fluid Tank | 33 l |
Transmission | 120 l |
Hydraulic System Factory Fill | 240 l |
Differential - Final Drives - Front | 186 l |
Differential - Final Drives - Rear | 186 l |
Hydraulic System - Tank Only | 140 l |
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes. |
Front | Fixed |
Rear | Trunnion |
Oscillation Angle | ±13° |
Brakes | ISO 3450: 2011 |
Operator Sound Level (ISO 6396) | 72 dB(A) |
Machine Sound Level (ISO 6395) | 113 dB(A) |
Operator Sound Level (ISO 6396) | 72 dB(A) |
Machine Sound Level (ISO 6395) | 109 dB(A) |
Height - Top of Exhaust Stack | 4835 mm |
Height - Top of Air Cleaner | 3895 mm |
Height - Top of Hood | 3334 mm |
Ground Clearance - Bumper | 933 mm |
Centerline of Rear Axle to Edge of Bumper | 3187 mm |
Wheel Base | 4550 mm |
Length - Front of Tire | 8715 mm |
Length - Straight Blade on Ground | 9927 mm |
Centerline of Front Axle to Hitch | 2275 mm |
Length - Universal Blade on Ground | 10470 mm |
Ground Clearance | 531 mm |
Height - Top of Cab | 4184 mm |
Chip Scoop Carry Capacity | 26.8 m³ |
Chip Scoop Doze Capacity | 53.3 m³ |
Coal Scoop Carry Capacity | 22.9 m³ |
Coal Scoop Doze Capacity | 45.9 m³ |
Advantages and Features
BUILT TO PERFORM
Unmatched Durability
- The full box-section rear frame resists torsional shock and twisting forces.
- Heavy-duty steering cylinder mounts efficiently transmit steering loads into the frame.
- Optimized axle mounting results in increased structural integrity.
- Achieve longer component life with increased size of upper hitch pin, frame plate, and bearing.
- Solid through-width push beams transfer and absorb stresses through a larger portion of the frame.
- Features fully enclosed hydraulic wet disc brakes for improved performance.
- Robust structures withstand the toughest conditions and multiple lifecycles to improve your bottom line.
- In corner dozing, stresses are transferred and absorbed through a larger portion of the frame.
MOVE MORE WITH LESS FUEL
Optimum Efficiency
- The Cat C18 engine is designed for maximum fuel efficiency in the most demanding applications.
- Experience reliable efficiency with complete control over injection timing, duration, and pressure with Mechanically Actuated Electronic Unit Injection (MEUI™).
- Best-in-class Cat planetary powershift transmission features consistent, smooth shifting and efficiency through integrated electronic controls.
- Extended engine life and improved fuel efficiency with reduced rated speed.
- Impeller Clutch Torque Converter (ICTC) and Rimpull Control System (RCS) provide precise rimpull control.
- Load sensing hydraulic steering system enables precise machine control for easier loading.
- Lock-up torque converter with advanced control of lock-up speed.
- On demand cooling fan protects investment and lengthens lifecycle.
- Fully integrated electronic engine controls provide quick response.
SAFETY FIRST
Increased Safety
- Optional Cat Detect with Object Detection System (rearview camera and radar) or standard Vision (rearview camera) increase operator awareness around the machine.
- Cab-mounted LED strobes provide warning for others near the machine.
- Optional HID or LED lights provide excellent workspace visibility.
- Optional heated mirrors ensure enhanced visibility for safe operation.
TECHNOLOGY THAT GETS WORK DONE
Innovative Technology
- Integrated technologies allow you to monitor, manage, and enhance your jobsite operations.
- Product Link™ remote monitoring provides valuable insight into machine or fleet performance through the VisionLink® interface, so you can make decisions that boost jobsite efficiency and lower operating costs.
- Vital Information Management System (VIMS™) 3G touchscreen monitor gives access to a wide range of sensor information and enhanced machine data to resolve problems before machine failure.
- Optional Cat Detect technologies enhance awareness of the environment around the machine for increased safety.
WORK IN COMFORT
Enhanced Operator Comfort
- Steering and Transmission Integrated Control System (STIC™) combines directional selection, gear selection, and steering into a single lever, maximizing responsiveness and control, while reducing operator fatigue.
- Operators can easily enter and exit the cab with fold-up STIC steer/ armrest, reduced access stairway angles, and standard stairway lighting.
- Experience reduced vibrations with isolated cab mounts and seatmounted implement and steering controls.
- Reduced interior sound levels keep operators comfortable throughout their entire shift.
REDUCE ENVIRONMENTAL IMPACT
Improved Sustainability
- The engine is available in configurations that meet U.S. EPA Tier 4 Final and EU Stage V emission standards, or equivalent to U.S. EPA Tier 3 or U.S. EPA Tier 2.
- Automatic Engine Idle Shutdown conserves fuel when machine is not in use.
- Generate less waste with maintenance-free batteries.
- Maximize machine life and lower operating costs with Caterpillar Reman and Certified Rebuild programs, which utilize reused or remanufactured components for 40 to 70% cost savings.
- Retrofit packages from Caterpillar deliver new features to older machines to get the most from your investment.
SAVE ON SERVICE AND MAINTENANCE
Simplified Maintenance
- Machine features ground level or platform access to easily reach daily service points.
- Swing-out doors on either side of the engine compartment provide easy access to critical daily service checks.
- Ecology drains prevent spills and allow for easier service.
- Intuitive design includes ground level access to transmission control valves for safe and convenient service.
PURPOSE-BUILT SPECIALTY MODELS
- Available in two scoop arrangements – wood chip and coal.
- Cat wood chip and coal scoops have the unique capability of maximizing your production by both dozing and carrying a load with each pass.
- A purpose built hydraulic system, optimized for use with this work tool, maximizes machine productivity and efficiency.
- Dual lift cylinders provide hydraulic lift capacity matched to the demands of the application.
- Can be equipped with optional ground level accessible swing-out reversing fan for quick inspection and easy cleanout.
- Equipped with underhood ventilation system which creates a neutral pressure environment to prevent wood chip ingestion from hood openings while providing fresh air to the alternator, electronics, and turbo.
- Extended top guard for increased capacity for wood chip scoops.
- Higher ground pressure decreases risk of fires and maximizes use of storage space.
- Less damage to coal or wood chips due to rubber tires.
- High ground speed provides ability to manage multiple piles.
- Scoop design allows load and carry function for mixing.
- Lift and tip-out design makes stockpiling operations easy.
- Scoop tilt control is standard to maximize worksite efficiency.
Standard Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
ELECTRICAL
- Alarm, back-up
- Alternator (100 amp)
- Batteries, dry
- Hazardous voltage lamp
- Converter, 10/15 amp, 24V to 12V
- Lighting system, (LED work lights, access and service platform lighting)
- Starting and charging system, 24V
- Starter emergency start receptacle
-
OPERATOR ENVIRONMENT
- Air conditioner
- Cab, sound suppressed and pressurized
- Cab, sound suppressed and pressurized, integrated rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 5-amp) and power port
- Cat Vision, rear-vision camera system
- Graphical information display, displays real time operating information, performs calibrations and customizes operator settings
- Tilt, tip controls
- Heater and defroster
- Horn, electric
- Light, cab (dome)
- Lights, directional
- Lunchbox and beverage holders
- Monitoring system (VIMS 3G)
- Radio, AM/FM/CD/MP3 Bluetooth®
- Instrumentation, gauges: - coolant temperature, engine hour meter, hydraulic oil temperature, powertrain oil temperature
- Mirrors, rearview (externally mounted)
- Rimpull control system (RCS)
- Seat, deluxe
- Seat belt, retractable, 76 mm (3 in) wide
- Steering and transmission integrated control (STIC™) system
- UV glass
- Operator presence
- Wet-arm wipers/washers (front and rear)
- Intermittent front and rear wipers
-
POWER TRAIN
- Brakes, oil-cooled, multi-disc, service/secondary
- Automatic retarding controls
- Case drain screens
- Engine, Cat C18 MEUI™, diesel, turbocharged/aftercooled
- Antifreeze, premixed 50% concentration of extended life coolant with freeze protection to -34°C (-29°F)
- Parking brake
- Turbine precleaner, engine air intake
- Radiator, Aluminum Modular Radiator (AMR)
- Manual switch and automatic fuel priming
- Starting aid (ether) automatic
- Throttle lock, electronic
- Torque converter, impeller clutch with lock-up control system and rimpull control system (switch and dial in cab)
- Transmission, planetary, power shift (4F/3R) electronic control
-
OTHER STANDARD EQUIPMENT
- Doors, service access (locking)
- Hitch, drawbar with pin
- Oil sampling valves
- Stairway, left side (rear access)
- Steering, load sensing
- Vandalism protection caplocks
Optional Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
POWER TRAIN
- -50° C (-58° F) antifreeze
- Engine oil change system, high speed, Wiggins
- Engine brake
- High ambient cooling-software
- Turbine precleaner, engine air intake dual stage
- Axle oil cooler
- Crankcase guards
-
OPERATOR ENVIRONMENT
- Cab precleaner
- Radio, AM/FM/CD/MP3 Bluetooth with Satellite SiriusXM
- Satellite Sirius radio with Bluetooth
- LED warning strobe
- CB radio ready
- Window pull down visor
- Cat Detect (object detection system)
-
MISCELLANEOUS ATTACHMENTS
- Front and rear roading fenders
- Fast fill fuel system (Shaw-Aero)