Technicial Specifications
Maximum Rating | 7520 kVA |
Minimum Rating | 4700 kVA |
Emissions/Fuel Strategy | Low Fuel Consumption |
Frequency | 50 Hz |
Speed | 720 & 1000 rpm |
Duty Cycle | Standby, Prime, Continuous |
Engine Model | 3616 V-16, 4-Stroke Water-Cooled Diesel |
Bore | 280 mm |
Stroke | 300 mm |
Displacement | 296 l |
Compression Ratio | 13:01 |
Aspiration | TA |
Fuel System | Direct unit injection |
Governor Type | Generator Set Monitoring System (GMS) |
Length - Maximum | 10261.7 mm |
Width - Maximum | 2530.3 mm |
Height - Maximum | 3977.7 mm |
Dry Weight - Genset (maximum) | 64470 kg |
Advantages and Features
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
Generator
- Matched to the performance and output characteristics of Cat engines
- Industry leading mechanical and electrical design
- Industry leading motor starting capabilities
- High Efficiency
Worldwide Product Support
- Cat dealers provide extensive post-sale support including maintenance and repair agreements.
- Cat dealers have over 1,800 dealer branch stores operating in 200 countries. The Caterpillar S��?�O��?�S��?��?��? program cost effectively detects internal engine component condition, even the presence of unwanted fluids and combustion by-products
Full Range of Attachments
- Wide range of bolt-on system expansion attachments, factory designed and tested Flexible packaging options for easy and cost effective installation
Standard Equipment
-
Air Inlet System <!-- 3600 series only -->
- Turbocharger, watercooled, engine oil lubricated
- Air inlet shutoff
- Aftercooler, fresh water, corrosion resistant coated (air side)
- Air cleaner
- Breather, crankcase, top-mounted
-
Cooling System
- Front mounted turbos
- Three-bundle oil cooler
- Engine coolant water drains
- Water temperature regulator
- Jacket water thermostats
-
Exhaust System
- 457 mm (18 in) Cat bolt pattern
- Dry, gas tight, exhaust manifold
- Includes adapter, flexible exhaust fitting
-
Fuel System
- Simplex or duplex
-
Generator System
- Custom generator per generator data sheet completed by Dealer
-
Governor System
- UG Actuator
-
Lube System
- Oil pressure regulating valve
- Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
- Crankcase explosion relief valves
- Oil filler and dipstick
- Service side engine mounted on cylinder block inspection covers
- Centrifugal oil filters with single shutoff
-
Mounting System
- Engine and generator mounting
- Damper, torsional vibration
-
Starting / Charging System
- Line group for single point custom connection
- Two motors, engine mounted at rear, on left side
- Vane type air starter
- Air silencer
-
General:
- Gear driven pumps: Fuel/oil/jacket water/aftercooler/Oil cooler water
- Paint, Caterpillar yellow
Optional Equipment
-
Air Inlet System
- Soot filter
- Air inlet adapter
- Heavy duty air cleaner
- Vertical support bracket
- Air cleaner louver assembly
- Boost control valve
-
Cooling System
- Expansion tank
- Auxiliary water pump
- Heating aids
- Cooling system aids
- Heat exchanger for single circuit
-
Exhaust System
- Weld flange and related hardware
- Flexible exhaust fittings
-
Fuel System
- Duplex primary fuel strainer
- Fuel priming pump
- Fuel system connections
-
Generator System
- Busbar connections
- Anti-condensation space heaters
- Class F insulation
- 3 Phase, six Leads, WYE
- Winding temperature detectors
-
Governor System
- 230 UA
- Battery backup/power supply
- Digital programmers
- EGB actuator
- Electronic/actuators
- 723 Plus
-
Lube System
- Lube ANSI adapter (Emergency connection)
- Oil pan drain valve
-
Mounting System
- Spring type vibration isolators
- Non-vertically restrained
- Vertically restrained
- Isolator
-
Starting / Charging System
- Turbine type air starters
- Redundant air starters
- Pressure reducing valve
- Compressed air flex hose
-
General:
- Custom paint colors