Technicial Specifications
| Pull-Down Capacity | Up to 29 483 kg (65,000 lb) |
| Hole Diameter | 165-250 mm (6.5-9.88 in) |
| Engine | Cat® C27 |
| Bit Load | Up to 32 655 kg (Up to 71,993 lb) |
| Components (1) | Dual starter motors |
| Components (2) | Ether starting aid (ether bottle supplied locally) |
| Features | Scheduled Oil Sampling (S·O·SSM) ports |
| Emissions: Equivalent to U.S. EPA Tier 4 Final - ISO 14396 | 650 kW |
| Emissions: Equivalent to U.S. EPA Tier 4 Final - ISO 14396 (DIN) | 884 mhp (PS) |
| Emissions: Equivalent to U.S. EPA Tier 2 - ISO 14396 (DIN) | 838 mhp (PS) |
| Emissions: Equivalent to U.S. EPA Tier 2 - ISO 14396 | 616 kW |
| Emissions: Equivalent to U.S. EPA Tier 2 - Engine Power | C27 @ 1,800 rpm |
| Emissions: Equivalent to U.S. EPA Tier 4 Final - Engine Power | C27 @ 1,800 rpm |
| Components (1) | Coolers with easy cleaning access |
| Components (2) | Separate engine cooling module |
| Components (3) | All cooler core sections are replaceable |
| Components (4) | Automatic variable speed fan control |
| Features | Functional in ambient temperature of 52° C (125° F) |
| Climate Level 1 Standard Fluids and Lubricants (1) | Rated down to –1° C (30° F) |
| Climate Level 1 Standard Fluids and Lubricants (2) | Withstands high heat to 52° C (125° F) |
| Climate Level 2 Arctic Fluids and Lubricants | Rated down to –18° C (–0.4° F) |
| Climate Level 4 Arctic Fluids and Lubricants (1) | Rated down to –40° C (–40° F) |
| Climate Level 4 Arctic Fluids and Lubricants (2) | Diesel fired heating system that heats and circulates engine coolant through engine block, below deck water tank, heating elements for battery trays |
| Climate Level 4 Arctic Fluids and Lubricants (3) | Full Arctic lubricant package to include engine and hydraulic oil |
| Climate Level 4 Arctic Fluids and Lubricants (4) | Electric heating package with breaker panel to power: 120V heating blanket for compressor receiver tank, heat trace for hosing from water tank to water pump and water fast-fill assembly, plus primary tank |
| Climate Level 4 Arctic Fluids and Lubricants (5) | Shore power connection box with switchable 240-600V (50 amp) connection (diesel gen set and/or plug supplied locally). Box includes standard 50 hz battery charger, if 60 hz charger required, to be ordered via after market, refer to P-n 540-4271 |
| Climate Level 4 Arctic fluids and lubricants (6) | Breaker panel includes five (5) additional breakers for locally supplied heating elements if needed |
| Batteries, Sealed (1) | Quantity: Four (4) |
| Batteries, Sealed (2) | Quantity: Six (6) (required for cold weather Level 2 and 4 and/or semi autonomy packages) |
| Features (1) | Leveling Jacks, A-frame/mast pivot and drill deck are welded integrally to mainframe for maximum durability and long life |
| Features (2) | Primary fuel tank capacity 1416 L (374 gal) |
| Features (3) | Fuel capacity expansion for additional 1416 L (374 gal) optional for total capacity of 2832 L (748 gal); (required for autonomy packages) |
| Features (4) | Three (3) egress points on deck areas in addition to main access |
| Components (1) | Stationary drill deck; for vertical and angle drilling |
| Components (2) | Four leveling jacks provide leveling on a 7° bench (any orientation) |
| Components (3) | Heavy duty tow hooks (front end) |
| Components (4) | Four (4) lift lugs, for use with cables or chains |
| Components (5) | Fixed access stairs to the cab area |
| Components (6) | Sturdy guardrails with toe guards, self-closing gates |
| Model | Cat® 336E EL Excavator type |
| Carrier Rollers | Three (3) |
| Track chain guards and guides | Level two |
| Drawbar Pull | 417000 N |
| Triple Grousers (1) | 600 mm (23.6 in); for hard rock; 0.88 bar (12.7 psi) ground bearing pressure |
| Triple Grousers (2) | 750 mm (29.5 in); for soft rock; 1.10 bar (15.9 psi) ground bearing pressure |
| Lower rollers | Twelve (12) |
| Travel Speed | 2.45 km/h |
| Components (1) | Two (2) primary pumps – 145 cc (piston, with proportional electronic controls) |
| Components (2) | One (1) auxiliary circuit pump – 110 cc (piston, load sensing) |
| Components (3) | Two (2) fan pumps – 74 cc (piston, with proportional electronic controls) |
| Components (4) | Two (2) charge pumps – 43.9 + 56.5 cc (double stack gear, fixed displacement) |
| Components (5) | Scheduled Oil Sampling (S·O·S) ports |
| Width Non-Cab End | 4.845 m |
| Width Cab End | 5.624 m |
| Note | Width and length dimensions include: cascading stairs and walk-around access for cab. |
| Mast Only Shipping Length | 18.72 m |
| Height - Mast Up | 19.546 m |
| Body Length | 11.708 m |
| Length - Mast Down | 20.18 m |
| Height - Mast Down | 5.134 m |
| Variable Grip Hydraulic Break Out Wrench Grip Ranges (1) | 114-152 mm (4.5-6.0 in) |
| Variable Grip Hydraulic Break Out Wrench Grip Ranges (2) | 152-216 mm (6.0-8.5 in) |
| Components (7) | Pipe wiper seal |
| Components (8) | Drill tool lubricator is included with selection of DTH Compressor |
| Components (1) | Two-piece roller deck bushing |
| Components (2) | Pipe positioner rollers |
| Components (3) | Deck wrench |
| Components (4) | Shock sub |
| Components (5) | Top Sub |
| Components (6) | Hammer Sub |
| Feature | Approach angle of 15 degrees facilitates loading and unloading on a lowboy |
| Components (13) | Lifting lugs |
| Components (1) | Alloy drill deck covers, for servicing when mast is horizontal |
| Components (2) | Seven (7) engine shut down buttons, by each drill egress/access point, in cab, in engine area, on drill deck |
| Components (3) | Over forty (40) conditional safety interlocks |
| Components (4) | Hinged window guard over the full length of the front drill window |
| Components (5) | Three (3) egress points on deck areas in addition to main access |
| Components (6) | Self-closing gates secure egress ladder locations |
| Components (7) | Electric horn activated by push button in the cab |
| Components (8) | Automatic tram alarm, audible |
| Components (9) | Under deck mounted battery box with keyed battery disconnect/starter disconnect/remote jump start terminals |
| Components (10) | Compressor air hoses with safety retention cables |
| Components (11) | Slip resistant surfaces |
| Components (12) | Tow hooks on non-drill-end |
| Cab - Premium | – Additional storage<br>– Leather seat with heat and ventilation<br>– Heavy duty seat suspension<br>– Dual pane window glass<br>– Removable guard for driller window, plus window facing power train<br>– Wipers for the driller window plus front and rear windows |
| Cab - Standard | – Fabric seat<br>– Single pane window glass<br>– Removable guard for driller window<br>– Wiper for the driller window |
| Cab Design | – Spacious FOPS cab is 3 m² (32.3 ft²) with an integrated operator station<br>– Cab rubber shock-mounts<br>– Operator station design integrates an ergonomic seat, joystick controls with full instrumentation, and dual 254 mm (10 in) color displays, high definition touchscreen and 12-volt power port<br>– Additional display screen for cc cameras; color, high-definition 254 mm (10 in)<br>– Three (3) cc cameras (front and left side) providing 360° vision coverage from operators seat; camera in the mast to view pipe rack carousel/top drive operation<br>– Power convertor 24V to 12V<br>– Radio-ready for communication and entertainment stereo<br>– Two swing-out doors and Cat keyed locks<br>– Literature holder<br>– Removable floor mat |
| Seating | – Seat swivels, locks and retractable, two-point/76 mm (3 in) wide seat belt, tilts (5° adjustment), lumbar support, fore/aft seat adjustment 80 mm (3.1 in) |
| Windows | – Large windows front, rear and right cab side; full length drill window with guard<br>– Windshield wipers with a common washer tank |
| Lighting | – LED interior lights and map light at operators seat, backlit joysticks and keypads<br>– Flood lights for the drill perimeter<br>– Spotlights for power group area; drill deck; mast carousel; access ladder and walkways<br>– Lighting package includes 4,200 lumens flood light on perimeter, mast clearance lights, cab mounted strobe, front mounted tram beacon |
| HVAC | – Floor heating vent<br>– Roof-mounted air conditioner/heating/pressurizing unit<br>– Filter access from deck<br>– Defogging HVAC vents on main window |
| Components (22) | Prewired for Terrain and autonomous operation |
| Components (23) | Drill Assist automated functionality:<br>– Auto level, auto jack retract<br>– Auto mast raise and lock, auto mast unlock and park |
| Components (1) | All electric controls for drilling, tramming, leveling plus auxiliary functions |
| Components (2) | Electronic compressor control |
| Components (3) | Rotary torque control |
| Components (4) | Virtual rotary head travel stops and interlocks |
| Components (5) | Pipe positioner engaged/disengaged indicator |
| Components (6) | Drill depth meter |
| Components (7) | Drill performance and drill health display system |
| Components (8) | Data logging of machine health with warnings and fault code records with export capability |
| Components (9) | Delayed engine shut down |
| Components (10) | Rotary head rpm gauge (digital display in screen) |
| Components (11) | Filter indicators for hydraulic, fuel, compressor and engine |
| Components (12) | Jack pressure sensors in display |
| Components (13) | Dust suppression control |
| Components (14) | Mast lock indicator |
| Components (15) | ECM proportional fan speed control system |
| Components (16) | Tram interlock, machine stability limits |
| Components (17) | Tram interlock, pipe in hole |
| Components (18) | Tram interlock, mast up and locked or down and parked |
| Components (19) | Tram interlock, jack retracted |
| Components (20) | Tram interlock, winch parked |
| Components (21) | Cab environment controls (AC, filter, heat, fan speeds) |
| Width Non-Cab End | 4.845 m |
| Width Cab End | 5.625 m |
| Note | Width and length dimensions include: cascading stairs and walk-around access for cab. |
| Mast Only Shipping Length | 16.32 m |
| Height - Mast Up | 17.146 m |
| Body Length | 11.708 m |
| Length - Mast Down | 17.78 m |
| Height - Mast Down | 5.134 m |
| Receiver Tank Choice (1) | Low pressure 8.6 bar (125 psi) for ASME/CRN/AU or CE |
| Receiver Tank Choice (2) | High pressure 24.1 or 34.4 bar (350 or 500 psi) for ASME/CRN/AU or CE |
| Compressor - Rotary Drilling | 56.6 m³/min (2,000 ft³/min) @ 8.6 bar (125 psi) |
| Compressor - DTH Drilling (1) | 38.2 m³/min (1,350 ft³/min) @ 34.4 bar (500 psi) |
| Compressor - DTH Drilling (2) | 42.4 m³/min (1,500 ft³/min) @ 24.1 bar (350 psi) |
| Features (1) | With the compressor’s variable volume control, the operator can limit air output resulting in reduced fuel consumption |
| Features (2) | Electronic compressor control and regulation |
| Features (3) | DTH selection includes tool oiler |
| Angle Drilling | Included with either mast |
| Mast Accessories Manual - 11.2 m (36.7 ft) or 13.6 m (44.6 ft) Mast | One (1) wire rope pipe catcher, manual bit basket |
| Mast Accessories Hydraulic - 11.2 m (36.7 ft) Mast | One (1) hydraulically actuated pipe catcher, hydraulically operated bit basket |
| Mast Accessories Hydraulic - 13.6 m (44.6 ft) Mast | One (1) hydraulically actuated pipe catcher, plus one (1) wire rope pipe catcher, hydraulically operated bit basket |
| Lifting Bails (Available on Request) | – API thread 89 mm (3.5 in) – to lift corresponding drill tools (6.75 in tricone bits or 6-inch class DTH hammers)<br>– API thread 114 mm (4.5 in) – to lift corresponding drill tooling (7.875 and 9.0 in tricone bits or 8-inch class DTH hammers)<br>– API thread 140 mm (5.5 in) – to lift shock sub adapter<br>– BECO thread 102 mm (4.0 in) – to lift corresponding drill pipe (5.5 in OD)<br>– BECO thread 114 mm (4.5 in) – to lift corresponding drill pipe (6.0, 6.5, 6.625 and 7.0 in OD)<br>– BECO thread 152 mm (6.0 in) – to lift corresponding drill pipe (7.625 in OD) |
| 6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 4 | 165 mm |
| 6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 1 | 127 mm |
| 6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 6 | 194 mm |
| 10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 1 | 127 mm |
| 6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 3 | 152 mm |
| 10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 6 | 194 mm |
| 10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 4 | 165 mm |
| 10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 3 | 152 mm |
| 10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 2 | 140 mm |
| 10.6 m (35 ft) Pipes for 11.2 m (36.7 ft) Mast - holds quantity of four (4) - Option 5 | 178 mm |
| 6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 2 | 140 mm |
| 6.1 m (20 ft) Pipes for 13.6 m (44.6 ft) Mast - holds quantity of four (4) - Option 5 | 178 mm |
| Pipe rack carousel, standard: | – 11.2 m (36.7 ft) Mast: holds quantity of four (4) 10.6 m (35 ft) pipes<br>– 13.6 m (44.6 ft) Mast: holds quantity of four (4) 6.1 m (20 ft) pipes |
| Features (7) | Sliding deck wrench assembly |
| 13.6 m (44.6 ft) Mast - Hole Diameter Range: 152-250 mm (6-9.875 in) - Single-Pass Depth | 13.6 m |
| Features (5) | Auto tensioning of pull down and hoist cables |
| 11.2 m (36.7 ft) Mast - Hoist Speed | 0.81 m/s |
| Features (3) | Drill strings configured for bit changes (above the deck) |
| Features (1) | Mast configurations complete with pipe rack carousel and angle drilling package (vertical, out to 30 degrees in 5-degree increments) |
| Features (8) | Configured with roller deck bushing for tricone applications, two-piece deck bushing for DTH |
| Features (10) | Drill pipe positioner |
| Features (11) | Rotation gear box with single motor up to 160 rpm, up to 11 700 N∙m (8,629 lbf-ft) torque |
| Features (9) | Closed circuit camera in mast is used to view pipe rack carousel/top drive operation while racking pipes |
| Features (6) | Variable grip hydraulic break out wrench for range of pipe diameters |
| 11.2 m (36.7 ft) Mast - Hole Diameter Range: 152-250 mm (6-9.875 in) - Multi-Pass Depth | Down to 53.9 m (Down to 176.7 ft) |
| Features (4) | Single Hydraulic Cylinder and cable system for pulldown/hoist |
| Features (2) | Hydraulically actuated, self-indexing pipe rack carousel accepts pipe diameters from 127 mm (5.0 in) to 194 mm (7.625 in) |
| 13.6 m (44.6 ft) Mast - Hole Diameter Range: 152-250 mm (6-9.875 in) - Multi-Pass Depth | Down to 37.9 m (Down to 124.6 ft) |
| 13.6 m (44.6 ft) Mast - Hoist Speed | 0.66 m/s |
| 11.2 m (36.7 ft) Mast - Bit Load (single pass) | Up to 22 321 kg (Up to 49,210 lb) |
| 11.2 m (36.7 ft) Mast - Pull-Down Capacity | Up to 20 411 kg (Up to 45,000 lb) |
| 13.6 m (44.6 ft) Mast - Bit Load (single pass) | Up to 32 655 kg (Up to 71,993 lb) |
| 13.6 m (44.6 ft) Mast - Pull-Down Capacity | Up to 29 483 kg (Up to 65,000 lb) |
| 13.6 m (44.6 ft) Mast - Hoist Capacity | Up to 16 584 kg (Up to 36,563 lb) |
| 11.2 m (36.7 ft) Mast - Hoist Capacity | Up to 15 309 kg (Up to 33,750 lb) |
| Components (1) | One-piece roller deck bushing |
| Components (2) | Pipe positioner rollers |
| Components (3) | Deck wrench |
| Components (4) | Top sub |
| Components (5) | Bit sub |
| Components (6) | Pipe wiper seal |
| Torque - Single Motor | 11700 N·m |
| Rotation Speed | 0-160 rpm |
| Components (1) | Spindle – 140 mm (5.5 in) API regular thread with splined collar |
| Components (2) | Rotary torque control |
| Components (3) | Virtual rotary head travel interlocks |
| Type (1) | Cat Terrain ready |
| Type (2) | Autonomy ready |
| Components (1) | Drill depth indicator |
| Components (2) | Product Link™ Elite (hardware from factory, subscription package via dealer) |
| Choices (1) | Water injection – tank mounted below front deck 1271 L (336 gal)<br>– Water flow meter, volume control, tank fill level indicator |
| Choices (2) | Water injection plus dry dust collector 127 m³/min (4,500 ft³/min) dust collector; includes standard water injection<br>– Self-cleaning filters, dust chute with ejector |
| Choices (3) | High volume water injection (maximum) – tanks total capacity 2786 L (736 gal)<br>– Tank below deck (isolated for extreme cold weather) capacity 1271 L (336 gal)<br>– Tank above deck capacity 1514 L (400 gal) |
| Choices (4) | Static dust curtains, four sided/boxed enclosed |
| Package (1) | Fast fill for fuel and water, automated lubrication system |
| Package (2) | Service center for lubricant drain and fill, automated lubrication system, fast fill fuel and water, blow down hose (option) |
| Working Weight Range | 56 468 kg to 64 154 kg (124,490 lb to 141,436 lb) |
Advantages and Features
WORLD-CLASS OPERATOR STATION
- Ergonomic controls to help operators stay alert and avoid fatigue
- Multifunction joystick controls and touchscreen monitors are easy to use and intuitive
- Excellent visibility, thanks to multiple cameras and full-length windows
- Optional heated and ventilated seat for enhanced operator comfort
100% CAT INTEGRATION
- Cat to the core, with common parts and components and consistent design characteristics across all Cat drill models
- Shared software for autonomous features
- Backed by the world-class support of the Cat dealer network
CAT ELECTRONICS: BACKBONE OF MACHINE
- Common electronic architecture across all Cat machines to ensure technician familiarity
- Cat Electronic Technician (Cat ET) enables fast and easy troubleshooting
- Serve as common platform for integrating future autonomy solutions
- Product Link™ Elite provides real-time performance tracking
MATCHED POWERTRAIN
- Volumetric air flow control enables operator to reduce air flow by up to 50% to match a specific drilling tool and application
- C27 engine matched to largest “standard” compressor in this class for fast cycle times
- Powertrain optimized to withstand rigorous drilling applications
- High - and low -pressure configurations offer variable volume air control
- Optimal feed force, rotary torque and air, helping to reduce fuel consumption
TECHNOLOGY AND AUTOMATION
- Integrated Drill Assist functionality, including auto level, auto retract jacks, auto raise and lower mast, and auto drill
- Machine health and performance monitoring keep machine running productively
- Drill depth meter helps reduce over- and under-drilling
- Ready to connect with the Cat MineStar suite of technologies, including Terrain for drilling and Command for drilling
SAFETY
- Excellent visibility, thanks to multiple cameras and full-length windows
- MineStar Command for drilling enables remote or autonomous operation — removing operator from the machine
- Seven engine shut-down buttons and more than 40 conditional safety interlocks
- Slip-resistant surfaces for safer ingress/egress and service
- LED interior lights and backlit joysticks and keypads; exterior spot and flood lights illuminate paths for ingress/egress and major service points
SERVICEABILITY
- Large water and fuel tanks reduce time spent refilling
- Grouped service-access points, neat hose-runs and wiring reduce maintenance time
- Cat MineStar Health offerings enable onboard health and performance monitoring
- Extended service intervals minimize maintenance downtime
SUSTAINABILITY
- Designed to use less fuel, which reduces engine emissions
- Tier 4 Final engines reduce NOx and particulate matter
- Reduced waste and lower owning and operating costs thanks to increased commonality of systems and components, plus a reduction in unique part numbers
- Longer maintenance intervals that decrease the amount of waste contributed to the environment
Standard Equipment
-
POWER TRAIN CHOICES
- Emissions: Equivalent to Tier 2, Engine Power C27 @ 1,800 rpm, ISO 14396 616 kW (826 hp), ISO 14396 (DIN) 838 mhp (PS)
- Emissions: Equivalent to Tier 4 Final, Engine Power C27 @ 1,800 rpm, ISO 14396 650 kW (872 hp), ISO 14396 (DIN) 884 mhp (PS)
- Compressor (2,000 ft³/min, 125 psi) – Rotary drilling package, 56.6 m³ (2,000 ft³/min) at 8.6 bar (125 psi); with low pressure receiver tank for ASME/CRN/AU or CE
-
CAB CHOICES
- Standard – Includes a fabric seat, single pane window glass, removable driller window guard, and a windshield wiper for driller window
-
CONTROLS
- Drill depth indicator and interlocks, auto-level, auto-mast
-
FRAME/DECK
- Machine access via fixed stairs
-
MAST ACCESSORIES
- 11.2 m (36.7 ft) or 13.6 m (44.6 ft): Pipe catcher, manual – one wire rope (for 11 m), two wire rope (for 13 m) pipe catcher, bit basket, manual
-
PIPE CAROUSEL 11.2 M (36.7 FT) MAST/10.6 M (35 FT) PIPE RACK. HOLDS QTY. OF FOUR (SELECT ONE)
- 127 mm (5.0 in) pipe; four pods
- 140 mm (5.5 in) pipe; four pods
- 152 mm (6.0 in) pipe; four pods
- 165 mm (6.5 in) pipe; four pods
- 178 mm (7.0 in) pipe; four pods
- 194 mm (7.625 in) pipe; four pods
-
PIPE CAROUSEL 13.6 M (44.6 FT) MAST/6.1 M (20 FT) PIPE RACK. HOLDS QTY. OF FOUR (SELECT ONE)
- 127 mm (5.0 in) pipe; four pods
- 140 mm (5.5 in) pipe; four pods
- 152 mm (6.0 in) pipe; four pods
- 165 mm (6.5 in) pipe; four pods
- 178 mm (7.0 in) pipe; four pods
- 194 mm (7.625 in) pipe; four pods
-
DRILL TOOL PACKAGES/ROTARY DRILLING FOR 11.2 M (36.7 FT) MAST (SELECT ONE)
- 127 mm (5 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
- 152 mm (6 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
- 165 mm (6.5 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
- 178 mm (7 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
- 194 mm (7.625 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
-
DRILL TOOL PACKAGES/DTH DRILLING FOR 11.2 M (36.7 FT) MAST (SELECT ONE)
- 140 mm (5.5 in); two-piece deck bushing, pipe positioner rollers, deck wrench, cross over hammer adapter; pipe wiper seal
- 165 mm (6.5 in); two-piece deck bushing, pipe positioner rollers, deck wrench, cross over hammer adapter; pipe wiper seal
-
DRILL TOOL PACKAGES/ROTARY FOR 13.6 M (44.6 FT) MAST (SELECT ONE)
- 127 mm (5 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
- 152 mm (6 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
- 165 mm (6.5 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
- 178 mm (7 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
- 194 mm (7.625 in); one-piece roller deck bushing, pipe positioner roller, deck wrench, cross over subs, pipe wiper seal
-
DRILL TOOL PACKAGES/DTH DRILLING FOR 13.6 M (44.6 FT) MAST (SELECT ONE)
- 127 mm (5.0 in); two-piece deck bushing, pipe positioner roller, deck wrench, cross over hammer adapter; pipe wiper seal
- 140 mm (5.5 in); two-piece deck bushing, pipe positioner roller, deck wrench, cross over hammer adapter; pipe wiper seal
- 165 mm (6.5 in); two-piece deck bushing, pipe positioner roller, deck wrench, cross over hammer adapter; pipe wiper seal
- 178 mm (7 in); two-piece deck bushing, pipe positioner roller, deck wrench, cross over hammer adapter; pipe wiper seal
-
TOP SUBS (ROTARY DRILLING ONLY) (SELECT ONE)
- 127 mm (5 in)
- 152 mm (6 in)
- 165 mm (6.5 in)
- 178 mm (7 in)
- 194 mm (7.625 in)
-
CLIMATE/REGIONAL CONSIDERATIONS
- Batteries, sealed quantity four (4)
- Level 1 – Standard fluids and lubricants. With a temperature range of –1° C (30° F) to 52° C (125° F)
- Decals, ANSI
- Decals, ISO
- Certifications, EAEU
- Certifications, CE
-
DUST SUPPRESSION
- Water injection 1271 L (336 gal)
- Static dust curtains, four sided/boxed enclosed
-
UNDERCARRIAGE; CAT 336E EL (SELECT ONE)
- Triple grousers 600 mm (23.6 in); for hard rock 0.88 bar (12.7 psi) ground pressure
- Triple grousers 750 mm (29.5 in); for soft rock 1.10 bar (15.9 psi) ground pressure
Optional Equipment
-
POWER TRAIN CHOICES
- Compressor (1,350 ft³/min, 500 psi) – DTH drilling package, 38.2 m³ (1,350 ft³/min) at 34.4 bar (500 psi), with high pressure receiver tank (500 psi) for ASME/CRN/AU or CE; includes hammer storage and 113.5 L (30 gal) hammer lubrication system
- Compressor (1,500 ft³/min, 350 psi) – DTH drilling package, 42.4 m³/min (1,500 ft³/min) @ 24.1 bar (350 psi) with high pressure receiver tank for ASME/DRN/AU or CE; includes hammer storage and 113.5 L (30 gal) hammer lubrication system
-
FRAME
- Fuel tank expansion of +1609 L (425 gal) for total of 3218 L (850 gal) (Required for autonomy packages)
- Platform on non-drill-end to mount fire suppression bottles and/or diesel gen set
- Jib crane ready (Jib crane not included)
-
CAB CHOICES
- Premium – Includes a leather seat with heat and ventilation, heavy duty suspension, dual pane window glass. Removable driller window guard and guard for window facing power train. Additional storage box and windshield wipers on front and rear windows
-
LED Lighting Package:
Provides 4,200 lumens flood light on perimeter, area spotlights have 1,950 lumens. Mast clearance lights and cab mounted yellow strobe light and a front mounted tram beacon
- Viewing hatch for hole spotting with spotlight (hydraulically operated)
- Foldaway trainer’s seat with retractable seat belt
- Window shades
- Cabin pressure manometer gauge
- Cab roof access system (includes ladders, cage and rails)
-
CONTROLS
- Drill Assist (single pass auto drill)
-
DRILL DECK MISC.
- Tool box in deck
- Hydraulic viewing hatch with spotlight
-
PRODUCT LINK™/TERRAIN
- Product Link (Cellular)
- Product Link (Dual: Satellite and Cellular)
- Terrain for Drilling (guidance system)/with G610 screen
-
OPERATOR ENVIRONMENT
- Fold up trainer’s seat with seat belt
- Cabin pressure manometer gauge
- Window shades
- Cab roof access system with ladder, cage and rails (only available with cascading stairs and cab walkway)
-
FRAME/DECK
- Fuel tank expansion adds 1416 L (374 gal) tank for a total capacity of 2832 L (748 gal); required for autonomy packages
- Machine access via cascading, hydraulic stairs; includes walkway around cab to drill deck
- Fire suppression ready; platform to mount fire suppression bottles and/or diesel gen set
- Jib crane ready (mounting kit only)
- Toolbox
-
TECHNOLOGY PRODUCTS
- Product Link Elite; cellular or dual (satellite and cellular)
- Terrain guidance system hardware
-
MAST
- Overhead winch assembly with cable and hook, plus with remote control; variable speed drive with ≥ 1814 kg (4,000 lb) rating, length to reach 6.1 m (20 ft) past drill deck
- Tool lubrication system for Rotary Drilling with 113.5 L (30 gal) capacity
- Pipe thread greaser with reloadable tank for disposable grease bucket
- 11.2 m (36.7 ft) Mast; angle drilling – vertical to 30° (in 5° increments)
- 13.6 m (44.6 ft) Mast; angle drilling – vertical to 30° (in 5° increments)
- Drill pipe thread greaser with reloadable tank or disposable grease bucket
- Tool lubrication system for rotary tricone bits 113.5 L (30 gal)
- Tool lubrication system for DTH hammer and bit (included in HP compressor package)
- Overhead winch assembly with remote, cable and hook
-
DRILL BITS, ROTARY TRICONE
- Recommended for Rotary Applications
- All bits have standard nozzles
- Obtain S/M/H codes from the Rock Formation to Bit Conversion table https://catpublications.com search for PEXQ1027
-
Ship out plans for each drill configuration allow for one pallet of bits. Additional pallets may require an additional truck.
– 171 mm (6.75 in), Option 1, (S2)
– 171 mm (6.75 in), Option 2, (M1)
– 171 mm (6.75 in), Option 3, (M3)
– 200 mm (7.875 in), Option 1, (S2)
– 200 mm (7.875 in), Option 2, (M1)
– 200 mm (7.875 in), Option 3, (M3)
– 229 mm (9.0 in), Option 1, (S3)
– 229 mm (9.0 in), Option 2, (M2)
– 229 mm (9.0 in), Option 3, (H1)
– 251 mm (9.875 in), Option 1, (M1)
– 251 mm (9.875 in), Option 2, (M3)
– 251 mm (9.875 in), Option 3, (H1)
-
MAST ACCESSORIES
- 11.2 m (36.7 ft) Mast: Pipe catcher, hydraulic – one hydraulically actuated pipe catcher, bit basket, hydraulic
- 13.6 m (44.6 ft) Mast: Pipe catcher, hydraulic – one hydraulically actuated pipe catcher, plus one wire rope pipe catcher, bit basket, hydraulic
-
DRILL PIPE*
-
Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast – Accepts quantity of four (4)
– 127 mm (5.0 in)
– 140 mm (5.5 in)
– 152 mm (6.0 in)
– 165 mm (6.5 in)
– 178 mm (7.0 in)
– 194 mm (7.625 in)
-
Standard carousel pipe: 6.1 m (20 ft) pipes for 13.6 m (44.6 ft) Mast – Accepts quantity of four (4)
– 127 mm (5.0 in)
– 140 mm (5.5 in)
– 152 mm (6.0 in)
– 165 mm (6.5 in)
– 178 mm (7.0 in)
– 194 mm (7.625 in)
-
Standard carousel pipe: 10.6 m (35 ft) pipe for 11.2 m (36.7 ft) Mast – Accepts quantity of two (2)
– Quantity of two (2) 7.62 m (25 ft) pipes with adaptors to connect to DTH hammer or tricone bit (hammer and tricone bit not included)
– 140 mm (5.5 in)
– 168 mm (6.625 in)
- Note: *Contact factory for additional pipe diameters
-
Standard carousel pipe: 10.6 m (35 ft) pipes for 11.2 m (36.7 ft) Mast – Accepts quantity of four (4)
-
BREAK OUT WRENCH (SELECT ONE)
- Variable grip hydraulic break out wrench range 114 mm to 152 mm (4.5 in to 6.0 in)
- Variable grip hydraulic break out wrench range 152 mm to 216 mm (6.0 in to 8.5 in)
-
DRILL TOOL PACKAGES/DUAL PURPOSE DRILLING FOR 11.2 M (36.7 FT) MAST
- 168 mm (6.625 in); two-piece bushing, pipe positioner rollers, deck wrench, dual purpose carousel, two each 7.62 m (25 ft) pipes plus sub adapters
-
SHOCK ABSORBER WITH CROSSOVER ADAPTER (REQUIRED FOR DTH, OPTIONAL FOR ROTARY DRILLING) (SELECT ONE)
- 127 mm (5 in)
- 140 mm (5.5 in)
- 152 mm (6 in)
- 165 mm (6.5 in)
- 178 mm (7 in)
- 194 mm (7.625 in)
-
SHOCK SUB FOR DUAL PURPOSE DRILLING/11.2 M (36.7 FT) MAST
- 168 mm (6.625 in) includes long top sub adapter
-
DRILL PIPE – 6.1 M (20 FT) PIPE FOR 13.7 M (44.9 FT) MAST; CAROUSEL HOLDS QTY. OF FOUR
- 127 mm (5 in) pipe
- 152 mm (6 in) pipe
- 178 mm (7 in) pipe
- 194 mm (7.625 in) pipe
-
DRILL PIPE – 10.6 M (35 FT) PIPE FOR 11.2 M (36.7 FT) MAST; CAROUSEL HOLDS QTY. OF FOUR
- 127 mm (5 in) pipe
- 140 mm (5.5 in) pipe
- 152 mm (6 in) pipe
- 165 mm (6.5 in) pipe
- 178 mm (7 in) pipe
- 194 mm (7.625 in) pipe
-
DRILL PIPE – 10.6 M (35 FT) PIPE FOR 11.2 M (36.7 FT) MAST; DUAL PURPOSE CAROUSEL HOLDS QTY. OF TWO
- 168 mm (6.625 in)
-
TRICONE DRILLING BITS GROUP – QTY. 9 PER PALLET
- 171 mm (6.75 in) OPT 2, (M1)
- 171 mm (6.75 in) OPT 3, (M3)
- 171 mm (6.75 in) OPT 1, (S2)
- 200 mm (7.875 in) OPT 2, (M1)
- 200 mm (7.875 in) OPT 3, (M3)
- 200 mm (7.875 in) OPT 1, (S3)
- 229 mm (9 in) OPT 2, (M2)
- 229 mm (9 in) OPT 3, (H1)
- 229 mm (9 in) OPT 1, (M1)
- 251 mm (9.875 in) OPT 2, (M3)
- 251 mm (9.875 in) OPT 3, (H1)
-
DTH HAMMERS AND BITS
- DTH Hammer – 152.4 mm (6 in) class with drive sub (all components, less DTH bit assembly)
-
BITS, 2F-FF-S-HD
171 mm (6.75 in) two flushing holes, flat face with spherical carbides. Heavy duty.
Kit includes: nine each bits, four each drive subs, three each additional foot valves, (bits configured with QL60 shank)
-
BITS, 2F-FF-S
171 mm (6.75 in) two flushing holes, flat face with spherical carbides.
Kit includes: nine each bits, four each drive subs, three each additional foot valves, (bits configured with QL60 shank)
-
BITS, 2F-CC-S
171 mm (6.75 in) two flushing holes, concave with spherical carbides.
Kit includes: nine each bits, four each drive subs, three each additional foot valves, (bits configured with QL60 shank)
-
BITS, 2F-CV-S+B
171 mm (6.75 in) bits, two flushing holes, convex with spherical gauge and ballistic face carbides.
Kit includes: nine each bits, four each drive subs, three each additional foot valves, (bits configured with QL60 shank)
-
BITS, 3F-CV-S+B
171 mm (6.75 in) three flushing holes, convex with spherical gauge and ballistic face carbides.
Kit includes: nine each bits, four each drive subs, three each additional foot valves, (bits configured with QL60 shank)
-
BITS, 3F-FF-S+B
171 mm (6.75 in) three flushing holes, flat face with spherical gauge and ballistic face carbides.
Kit includes: nine each bits, four each drive subs, three each additional foot valves, (bits configured with QL60 shank)
-
BITS, 3F-CC-S+B
171 mm (6.75 in) three flushing holes, concave with spherical gauge and ballistic face carbides.
Kit includes: nine each bits, four each drive subs, three each additional foot valves, (bits configured with QL60 shank)
-
SERVICE PACKAGES/FLUIDS SYSTEM FOR 11.2 M (36.7 FT) OR 13.6 M (44.6 FT) MAST IN ANGLE DRILLING
- Fast fill for fuel and water and automated lubrication system
- Central drain/fill service center for lubricants, fast fill for fuel and water, a blow-down hose and automated lubrication system
-
SERVICE TOOLS
- Bushing retention tool – 102-194 mm (4.0-7.625 in)
-
Work Tools
– Lifting bails (available on request; required for commissioning)- API thread 89 mm (3.5 in)
- API thread 114 mm (4.5 in)
- API thread 140 mm (5.5 in)
- BECO thread 102 mm (4.0 in)
- BECO thread 114 mm (4.5 in)
- BECO thread 152 mm (6.0 in)
- Lifting bails: API thread 89 mm (3.5 in)
- Lifting bails: API thread 114 mm (4.5 in)
- Lifting bails: API thread 140 mm (5.5 in)
- Lifting bails: BECO thread 102 mm (4.0 in)
- Lifting bails: BECO thread 114 mm (4.5 in)
- Lifting bails: BECO thread 152 mm (6.0 in)
-
CLIMATE/REGIONAL CONSIDERATIONS
- Batteries, sealed quantity six (6) (required for cold weather Level 2 and 4 and/or semi autonomy packages
- Level 2 – Arctic – Temperature down to –18° C (0° F) Arctic fluids and lubricants
- Level 4 – Temperature down to –40° C (–40° F) 50 hz heating components, high pressure compressor. Arctic fluids. Diesel fired heater for engine coolant, primary water tank and batteries. Heated blankets for receiver tank and water suction line. Junction box with provisions for adding customer supplied shore power connector 240V/50A. If needing 60 hz capability, must order 60 hz battery charger through aftermarket
-
DUST SUPPRESSION
- Dust curtains, four sides boxed in, with hydraulic lifters to raise front and rear dust curtains (recommended with dust collector)
- Tram off spray system
- Water injection 1271 L (336 gal) plus dry dust collector 127 m³/min (4,500 ft³/min)
-
Water injection, high volume 2786 L (736 gal)
– Tank below deck (isolated for extreme cold weather) capacity 1271 L (336 gal)
– Tank above deck capacity 1514 L (400 gal)
- Dust curtain hydraulic lifters raise front and rear dust curtains (recommended with dust collector)
- Tram off spray to wet the ground around the cuttings pile
